SDS

Safety Data Sheet
670HS Karna-Sil Ultra
SDS Revision Date:
10/10/2019
Page 5 of 10
EXPOSURE LIMITS : Not Applicable
ENGINEERING CONTROLS: Provide sufficient mechanical (general and/or local exhaust)
ventilation to maintain exposure below TLV(s). General ventilation is recommended. Additional
local exhaust ventilation is recommended where vapors, mists, or aerosols may be released.
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Wear protective eyeglasses or chemical safety goggles, per OSHA eye and
face-protection regulations (29 CFR 1910.133). Contact lenses are not eye protection devices.
Appropriate eye protection must be worn instead of, or in conjunction with contact lenses.
SKIN: Wear chemical resistant gloves. Wear protective clothing to prevent skin contact. Keep
exposed skin area to a minimum. Eye wash station and safety shower should be available.
RESPIRATORY: Use only NIOSH/MSHA approved air purifying or supplied air respirator operated
in a positive pressure mode per the NIOSH/OSHA occupational health guidelines for chemical
hazards. If it is possible to generate significant levels of vapors or mists, a NIOSH approved or
equivalent respirator is recommended.
WORK HYGIENIC PRACTICES: Use good personal hygiene practices. Wash hands before eating,
drinking, smoking, or using toilet facilities. Promptly remove soiled clothing and wash thoroughly
before reuse. Shower after work, using plenty of soap and water. Open containers of food and
beverages should be kept away from areas where the product is used or stored.
Eating, drinking, smoking and application of cosmetics should be prohibited in areas where the
product is being used.
OTHER USE PRECAUTIONS: Conditions of use, adequacy of engineering or other control
measures, and actual exposures will dictate the need for specific protective devices at your
workplace.
COMMENTS: Not Applicable
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Viscous liquid
COLOR: White, Gray, Tan, etc.
ODOUR: Slight sweet smell
ODOUR THRESHOLD: Not Applicable
pH: Not Applicable
MELTING POINT: Not Applicable