SDS

Safety Data Sheet
670HS Karna-Sil Ultra
SDS Revision Date:
10/10/2019
Page 3 of 10
Crystalline Sodium Potassium
Aluminosilicate (Quartz)
30% to 35%
14808-60-7
Silanol Terminated Polydimethylsiloxane
15% to 20%
70131-67-8
Titanium Dioxide
5% to 10%
13463-67-7
Methyl Oximino Silane
0% to 5%
22984-54-9
* Toxic chemical subject to the reporting requirements of section 313 of Title III and of 40 CFR 372.
"WARNING: THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND
BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM."
4. FIRST AID MEASURES
EYES: In case of contact, flush eyes with large amounts of running water for at least 15 min.
Hold eyelids apart to ensure rinsing of the entire surface of the eye and lids with water. Get
medical attention
SKIN: Remove as much of the material as possible using mechanical/waterless methods before
washing with water. Seek medical attention for any burns or irritation resulting from contact with
cure by-products
INGESTION: Never give an unconscious person anything to drink. If unconscious, treat for
shock. Notify a physician or the nearest poison control center immediately. If conscious, have the
person rinse his mouth with cold water. Do not attempt to induce vomiting (vomiting may occur
naturally, but should be avoided if possible). If unconscious and vomiting, turn the person
to his side to avoid choking.
INHALATION: If inhaled, remove to fresh air and provide oxygen if breathing is difficult. Give
artificial respiration if not breathing. Get medical attention.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
SYMPTOMS: Not Applicable
EFFECTS: Not Applicable
NOTES TO PHYSICIAN: Not Applicable
5. FIRE FIGHTING MEASURES
SUITABLE EXTINGUISHING MEDIA: Use foam, dry chemical, CO2, or water.
FIRE FIGHTING PROCEDURES: As appropriate for surrounding materials/equipment. If
electrical equipment is involved, the use of foam should be avoided. Use water spray to cool non-
involved containers.