SDS

Safety Data Sheet
502MS Karna-Flex
SDS Revision Date:
Page 5 of 14
5. Fire-fighting measures
5.1. Extinguishing media
Carbon dioxide (CO2 ), foam, or dry chemical. Water may be used to Cool containers exposed to heat.
5.2. Special hazards arising from the substance or mixture
When heated above flash point, material will release flammable vapors which can burn or be explosive in confined
spaces if ignited. Do not mix with strong oxidants such as chlorine or concentrated oxygen.
Hazardous decomposition: Hazardous decomposition products include carbon dioxide (CO2), carbon monoxide (CO)
Nitrogen oxides, smokes and fumes.
Keep away from heat / sparks / open flames / hot surfaces - No smoking.
Keep cool.
Ground / bond container and receiving equipment.
Use explosion-proof electrical / ventilating / light / equipment.
Use only non-sparking tools.
Take precautionary measures against static discharge.
Do not breathe mist / vapors / spray.
Do not get in eyes, on skin, or on clothing.
5.3. Advice for fire-fighters
When heated above flash point, material will release flammable vapors which can burn or be explosive in confined
spaces if ignited. Do not mix with strong oxidants such as liquid chlorine or concentrated oxygen.
Minimize breathing vapors, gases or fumes of decomposition products. Do not enter any enclosed or confined fire
space without proper protective equipment, including self-contained breathing apparatus.
ERG Guide No.
----
6. Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Put on appropriate personal protective equipment (see section 8).
When heated above flash point, material will release flammable vapors which can burn or be explosive in confined
spaces if ignited. Do not mix with strong oxidants such as chlorine or concentrated oxygen.
6.2. Environmental precautions
Do not allow spills to enter drains or waterways.
Use good personal hygiene practices. Wash hands before eating, drinking, smoking or using toilet. Promptly remove
soiled clothing and wash thoroughly before reuse.
01/13/2022