Instructions / Assembly

MSDS 501 Page 3 of 4
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Respiratory Protection: Use supplied-air respirator in confined areas or with vapors in high concentrations.
Ventilation: Local Exhaust: In enclosed areas. Special: None
Mechanical: In enclosed areas. Other: None
Eye Protection: Safety glasses or face shield for liquid material.
Protective Gloves: Solvent impervious gloves.
Other Protective Clothing Equipment: Long sleeves and impervious clothing to protect against splashing.
Work/Hygienic Practices: See Section 7.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Appearance and Odor:
White liquid, slight ammonia odor
Vapor Pressure:77°F
23.7mm of hg
Boiling Point:
212°F
Evaporation Rate (Butyl Acetate=1)@ 77°F:
<1
Melting Point (R & B):
N/A
Vapor Density (Air = 1):
>1
Solubility in water:
soluble.
Flash Point (PMCC):
NA see sec. 5
Specific Gravity (H
2
O=1):
1.10 – 1.45
SECTION 10 - STABILITY AND REACTIVITY
Stability: Stable
Conditions to Avoid: Auto-ignition temperature unknown.
Incompatibility (Materials to Avoid): May react with strong oxidizing materials.
Avoid Freezing
Hazardous Polymerization: Will not occur.
SECTION 11 - TOXICOLOGICAL INFORMATION
Product may cause respiratory irritation, headache, dizziness, nausea and vomiting. Prolonged or repeated
contact with skin may cause dermatitis.
Carginogenicity: NTP?: No IARC Monographs?: No OSHA Regulated?: No
SECTION 12 - ECOLOGICAL INFORMATION
EPA Hazard Classification Code:
Acute Hazard: ____ Chronic Hazard: ____ Fire Hazard: ____ Pressure Hazard: ____
Reactive Hazard: ____ Not Applicable: X