Instructions / Assembly

330 CENTRAL AVENUE, CLARK, NJ 07066
732-388-0300 • 800-526-4236 • FAX: [phone]
WEB: http://www.karnakcorp.com
Roofing
Roofing
13
Read Material Safety Data Sheets before using this product.
FM1010
APPLICATION:
Spread Karnak #19AF Flashing Cement to an average thickness of 1/8”
(approximately 8 gallons per square) and press tightly into joints, seams or cracks.
To repair large cracks, breaks and blisters:
1. Spread Karnak #19AF Flashing Cement over the damaged area.
2. Embed Karnak Cotton, Fiberglass or Poly-Mat Membrane reinforcement.
3. Apply another coat of Karnak #19AF Flashing Cement over the entire patch.
CARE OF TOOLS:
Tools and other equipment should be thoroughly cleaned with mineral spirits, taking
necessary precautions when handling combustible materials.
CAUTION:
Do not use near open flame. Avoid breathing solvent fumes and prolonged contact
with skin. Do not take internally. If swallowed, do not induce vomiting. Call a
physician immediately. Keep out of reach of children. Keep container covered when
not in use. Do not thin. Dispose of in an environmentally safe manner. Cover air
intakes during application and while drying.
PACKAGING:
Available in 5 gallon pails, 3 gallon buckets and 1 gallon cans.
If further information is needed, contact Karnak Technical Services at
1-800-526-4236.
Please see page 212 for additional mold and safety information.
19AF Flashing Cement