SDS
Page
5
of
9
Safety Data Sheet
180 EPOXY PRIMER PART B
SDS Revision Date: 10/16/2018 rev4
8.2. Exposure controls
Respiratory In case of insufficient ventilation, wear suitable respiratory equipment. Respirator selection
must be based on known or anticipated exposure levels, the hazards of the product and the
safe working limits of the selected respirator.
Hand Wear chemically resistant protective gloves.
Eyes Safety glasses or face shield for liquid material.
Skin Safety glasses or goggles are recommended when handling product. Wear suitable
protective clothing.
Engineering Controls Maintain levels below Community environmental protection thresholds. Use ventilation
adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below
recommended exposure limits.
Other Work Practices Do not eat, smoke or drink where material is handled, processed or stored. Wash hands
carefully before eating or smoking. Handle according to established industrial hygiene and
safety practices.
9. Physical and chemical properties
Appearance Viscous
Color Dark Gray
Odor Aromatic, strong
Odor threshold Not Measured
pH Not Measured
Melting point / freezing point NA
Initial boiling point and boiling range No Measured
Flash Point > 60
o
C = > 60
o
C
Flammability (solid, gas) Flammable
Upper/lower flammability or explosive limits Lower Explosive Limit: Not Measured
Upper Explosive Limit: Not Measured
Vapor pressure (Pa) Not Measured
Vapor Density Not Measured
Specific Gravity 1.394
Solubility in Water Not Measured