SDS

Page 4 of 9
Safety Data Sheet
180 EPOXY PRIMER PART B
SDS Revision Date: 10/16/2018 rev4
General measures - Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to
unnecessary and unprotected personnel. Eliminate sources of ignition.
6.2. Environmental precautions
For containment - Contain and/or absorb spill with inert material (e.g. sand, vermiculite), then place in a suitable
container. Do not flush to sewer or allow to enter waterways. Use appropriate Personal Protective Equipment (PPE).
Methods for cleaning up
– Scoop up material and place in a disposal container. Provide ventilation.
6.3. Methods and material for containment and cleaning up
See section 8 for further information on protective clothing and equipment and section 13 for advice on waste
disposal.
7. Handling and storage
7.1. Precautions for safe handling
Keep away from sources of ignition. – No Smoking. Avoid contact with skin and eyes. Do not swallow. Avoid
breathing vapour or mist. Handle and open container with care. When using do not eat, drink or smoke.
Hygiene measures - Wash hands before eating, drinking, or smoking. Launder contaminated clothing before reuse.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions - Keep out of the reach of children. Keep container tightly closed and in a well-ventilated place.
7.3. Specific end use(s)
Not available.
8. Exposure controls and personal protection
8.1. Control parameters
CAS No.
Ingredient
0001317-65-3
Limestone
68410-23-1
Fatty acids, C18-unsaturated, dimers,
reaction products with
Polyethylenepolyamines
64742-95-6
Solvent naphtha, petroleum, light aromatic
1333-86-4
Carbon Black
Value
TWA (15 mg/m
3
total; 5mg/m
3
resp)
TWA: 10mg/m
3
No Established Limit
No Established Limit
Not applicable
Not applicable
3.5 mg/m
3
OSHA
Source
ACGIH
OSHA
ACGIH
OSHA
ACGIH
OSHA