Product Manual

19
!
!
!
4.1.3.7 FOO T PL A T E
4.1.3.7.1 HEIGHT
To adjust the footplate height, follow these
instructions as listed below:
● Use the KARMA tool provided to loosen the bolt at the
end of the footrest arm.
● Adjust to required height and tighten. (See Figure 4.30)
● Make sure that the footplate height is adjusted pr operly
according to the user’s calf length to reduce pressure on
the body .
!
!
!
!
!
!
!
!
!
!
!
!
!
Figure 4.30 Figure 4 .31
4.1.3.7.2 LONGITUDINAL (FORE/AFT) POSITION
To accommodate the occupant’s leg position and
flexibility, follow these instructions as listed below:
● Remove the footplate fastener bolts on each plat e .
● Adjust the plate position on the footplate support tube
below as desired and,
● Re-attach the footplate fastener bolts. (See Figure 4.31)
4.1.3.7.3 LATERAL (SIDEWAYS) POSITION
To open or close the gap between the footplat es,
follow these instructions as listed below:
● Loosen the footplate fastener bolts on each plat e .
● Adjust the plate position as desired and re-tighten the
footplate fastener bolts. (See Figure 4.32)