Product Manual

16
!
!
!
!
Figure 4.23 Figure 4.24
!
!
!
!
CAUTION:
!
! You must make sure that the axle is fully located in t h e
wheelchair bracket and that the ball bearings are fully open a n d
have positively attached the wheel in the frame.
! The rear wheel can be mounted at different positions on the
frame to alter the seat height and overall stability of the c h a i r .
Changing the wheel position should be carried out b y
authorized dealer or qualified therapist.
4.1.3.4.3 IMPORTANT DO’S AND DON’ T S
● DO keep axles clean and lubricated with light oil or
maintenance spray .
● DO maintain correct tyre pressure if using pneumatic
tyr e s.
● DON’T try to remove the wheels while the wheelchair is
occupied even when using anti-tippe r s .
4.1.3.5 FOO T REST
Footrests can swing away, which makes transferring out
easie r .
4.1.3.5.1 To remove the footrest, press the release pin first and
rotate the footrest until it faces outwar ds.
4.1.3.5.2 To attach the footrest, locate it on the frame plug a t
about 90 degrees (perpendicular) to the side of the
frame and rotate inwards until you hear a “ c lick”
sound, which means the footrest is fixed on the frame.