Product Manual

15
!
!
!
!
Figure 4.21 Figure 4 .22
4.1.3.4 REAR WHEEL
Your wheelchair could be supplied with quick -r elease
wheels for optional. If so, please follow these instructions
as listed below .
4.1.3.4.1 REAR WHEEL REMOV AL
To remove the rear wheel, follow these instructions as
listed below:
● Ensure that the brake is in the unlocked position f ir st.
● Support the weight of the chair with one hand by holding
the push handle.
● Depress the hub cover and hold down the quick - r e lease
mechanism.
● Remove the wheel. (See Figure 4.23)
4.1.3.4.2 REAR WHEEL A TT A C HMENT
Ensure that the brake is in the unlocked position first. Take u p
the assembled wheel and axle and depress the button in t he
centre of the axle as mentioned above. This retracts the b all
bearings that will allow you to push the axle into the wheel
bracket that is located on the lower rear frame of the
wheelchair. When you remove your thumb from the button on
the axle, the ball bearings should be visible protruding fr om
the axle at the back of the wheel bracket. This will secure the
wheel safely in the frame. (See Figure 4.24 at the next p a ge)