Product Manual

10
!
!
!
!
Figure 4.4 Figure 4.5 Figure 4.6
!
!
!
!
WA R N I N G :
!
! The primary function of the rigidifying push-bar is to maintain a n d
avoid deforming of the backrest, which could cause the user to be
disco mfo r t .
! Never use the rigidifying push-bar to push or pull the wheelcha i r ,
or it may lead to fracture and cause severe injury of the use r .
!
!
4.1.2 FOLDING
While folding the KM-BT10, follow these instructions as list ed
below:
4.1.2.1 Separate the back and seat cushions from the wheelchai r .
(See Figure 4.7)
4.1.2.2 Detach the calf strap. (See Figure 4.8)
4.1.2.3 Flip up the footplates. (See Figure 4.9)
4.1.2.4 Release the knob bolt at the middle, then push down the
rigidifying push-bar. (See Figure 4.10)
4.1.2.5 Lift up the front part of the wheelchair lightly, grasp the
middle lever of the seat pan, apply an upward force and
simultaneously use your stronger foot to tread on the cr o ss
bar until the wheelchair is fully closed. (See Figure 4.11)
4.1.2.6 Folding is now completed. (See Figure 4.12)