Manual

z. A patented Accessory Rail can be attached to the frame of the Combat

NCO™ to use of additional accessories and remove without screws.

1-2. Combat NCO™ Accessories:

a. The Combat NCO™ can be fully silenced and take on multi forms to

meet all combat situations. It has a Rifle component configuration. It

can be upgraded to the Combat 1911A3 and 1911A4 systems in testing

where new ammunition and components will be available if approved

for military use.

b. The NCO Adjustable Rear Sight is an accessory that looks almost

exactly like Fixed Rear sight and shares its attributes. However it can be

mechanically adjusted to move the sights for different ammunition.

c. A new NCO Sear design allows for greater safety of the firearm under

all conditions and trigger pulls. In conjunction with Sear Spring a choice

of trigger pull weight can be selected from 2-12 pounds. It requires no

fitting and the pull weight can be predetermined.

d. NCO NosePiece Accessory: The Combat NCO™ may add a weighted

NosePiece to provide stability in a fully loaded condition of 7 rounds

and stabilizes the Combat NCO™ in acquiring targets or providing

suppressing fire at long distances. Further, the NosePiece can and does

contain muzzle blast condensing said blast into an orange cone. The

shooter retains night vision and suppresses visual complications with

night vision optics.

e. NCO NosePiece Laser can be installed in the lower disassembly hole on

the NosePiece. That hole is threaded. An NCO Laser can be screwed

into this receptacle and provide an aiming device in low light conditions

and to laze targets up to 1 ½ miles to direct other munitions on targets.

f. NCO Ambi magazine release allows for better ejection of empty

magazine without shifting the hand to eject or remove with either hand.

It allows magazine release in extreme cold.

g. A SolidRifle component can be added to the lower unit or frame. A

number of rifle calibers are available for special operations using the

Combat NCO™.

h. NCO .45 acp S7 barrels can be ordered and retrofitted to CQBP. This

barrel made for the Lippard Combat NCO™ 1911A3 uses advanced

ammunition not currently available and is 16 times stronger than current

barrels in use. The barrel will accept conventional .45 acp ammunition in

service as well as the ultra high velocity ammunition in testing. The

barrel is identified by the nomenclature located on the chamber hood.