Manual

barrel bushing, slide stop and hammer components. As the firearm heats

up the material bleeds into the action as required. Conversely in cold

conditions it remains a liquid to provide operational capability. Further,

in extreme conditions such as HALO applications the gun can be used

immediately without it seizing to the hand by subzero temperature.

o. Magazine surfaces are further coated with Teflon an anti moisture

application to prevent seizing in cold weather conditions.

p. The Receiver and Slide are made of S7 tool steel for 100%

interchangeability of parts and components.

q. The Ejection port has been lowered and the back flared to deflect empty

cartridges cases to the right and rear of the shooter.

r. Extended Slide Stop allows for Slide release without shifting the hand

position. It allows for use of either hand if needed. The tolerances have

been improved between Receiver and Barrel Military Link. Surfaces

have been recessed in three locations for Anti-Seize functionality in all

weather conditions of friction.

s. Ambi Safety allows for weak hand use of the pistol safety. A positive

Safety on either side makes the Safety reliable for long use. The

enlarged size facilitates manual operation under extreme conditions. A

4-40 threaded screw is that is required to service and clean the part.

t. The Sear ledge has also been modified to channel debris that could

invade the pistol from a cocked and locked condition away from the

Sear ledge that could cause the pistol to fail.

u. The Hammer has rebated side walls to prevent stoppage in a mud

condition or fouling. On the inside frame contact surfaces are rebated

providing a reservoir for anti-seize for functioning in extreme weather

conditions but also to capture impurities invading the Hammer area

contact space that could cause malfunctions.

v. The Grip Safety cavity in the Receiver has been modified to eliminate

the malfunctions found to occur from ice, mud, blood and other debris

pressed into the Frame that prevents the Grip Safety from being applied.

w. The Firing Pin has added serrations to clean the firing pin during firing

preventing malfunctions.

x. The Front Sight is luminous. When combined with the two on the

rear sight the three dots horizontally aligned provide a shooting

plane for 25 yard point of aim firing accuracy. It further the front

sight has graduations of yardage in which the pistol can be aimed at 50,

225, and 400 yards without sight adjustment if required.

y. The Rear Fixed Sight is serrated to deflect light to a rear downward

angle providing a clear sight picture without reflection to the eye under

all conditions. The top rear surface has a luminous dot on either side of

the aperture. When aligned with the front sight dot it presents a line of

reference in which to accurately shoot point of aim to 25 yards. The

upper edge surface of the Rear Sight provides a killing surface in the

final use of a Combat NCO™ in a defense mode. An in Offensive mode

an enemy can be dispatched if hit with the Rear Sight.