Manual

13
Section V. DISSEMBLY INSTRUCTIONS
5-1. DISASSEMBLY OF THE WEAPON. The Lippard Combat NCO™ is a variant of
the Browning 1911 model. It has patented and improved parts and components.
1. Remove the magazine.
2. Point the weapon in a safe direction and open the slide; inspect to insure pistol is
unloaded.
3. Close the Slide.
4. Place the weapon on manual safe with the hammer cocked.
5. Depress the NosePiece Plug.
6. Rotate the NosePiece Counter clockwise
removing it with the Spring Plug under
tension of your finger. For a standard bushing rotate it CLOCKWISE and remove
the Spring Plug. Fig. 5
7. Slowly release the tension of the Recoil Spring holding in firmly on the Spring
Plug.
8. Replace the NosePiece over the barrel at 90 degrees but do not install holding the
barrel in position for disassembly. (If a Bushing is installed only remove after the
Slide has been removed from the Frame.)
9. Unlock the manual safety.
10. Open the Slide to the Slide Disassembly notch. Fig. 6.
11. Remove the Slide Stop pin.
12. Upside down Remove the Slide.
13. Remove the Nosepiece.
14. Remove the Recoil Spring, Spring Plug and Recoil Spring Guide.
15. Remove the barrel.
To re-assemble, reverse the disassembly process.