Use and Care Manual

◆ PARTS INVENTORY:
1.Take the screws out of the plate
with a screwdriver. Line up the holes
on the plates. Put the screws in and
then tighten them.
2. Twist out the screws on the
supporting rods with a screwdriver.
Align the holes on the supporting
rods to those on the plates. Put the
screws in and retighten them.
5. Install the wheels to the plate in
the same way mentioned above.
6. Put the fan cleaner into the
opening on the tabletop. Align the
holes on the fan cleaner to those at
the bottom of the table panel. Lay
the screws into the holes and secure
them with a screwdriver.
3. Loosen the screws on the cabinet
door. Line up the holes on the door
with the hinge on the plate. Put the
screws in and tighten them.
4. Attach the washer to the wheel
bolt. And then fasten the wheel bolt
to the hole at the cabinet bottom by
turning it clockwise. To tighten the
wheel, you can use the tiny wrench
provided or your own wrench that
may fit. And your hands may work as
well. You can turn the wheel with
your hands at first and then turn it
more tightly it with the wrench.
Other wheels can be installed in the
same way.
◆ ASSEMBLY ILLUSTRATION:
step1
step2
step3
step4
step5 step6