K 4.86 M K 5.86 M Operating Instructions Before first use of the unit read these operating instructions and act in accordance with them 5.962-344.
Dear Customer, Please read and comply with these instructions prior to the initial operation of your appliance. Retain these operating instructions for future reference or for subsequent possessors. Proper Use This high-pressure cleaner is designed for domestic use only: – to clean machines, vehicles, buildings, tools, facades, terraces, garden equipment etc. using a high-pressure water jet (and detergents if required). – with accessories, replacement parts and detergents approved by Kärcher.
sonous. Do not use acetone, undiluted acids and solvents as they are aggressive towards the materials from which the appliance is made. 몇 Warning Unsuitable extension cables can be hazardous. Only use extension cables outdoors which have been approved for this purpose and labelled with a sufficient cable cross section: 1 - 10 m: 1,5 mm2 10 - 30 m: 2,5 mm2 Check the high-pressure hose for damage before every use. Please arrange for the immediate exchange of a damaged high-pressure hose.
Safety Devices Initial start-up Safety devices prevent injury and may not be modified or bypassed. When the appliance is delivered, the HP hose and trigger gun are not attached, this prevents buckling. Please mount these before using the appliance for the first time. Î Push out the safety clip in the trigger gun using e.g. a small screwdriver. Î Join HP hose and trigger gun together. Î Push clip in until it engages and check that it is securely fastened by pulling on the HP hose.
Î Use the Kärcher water filter to protect the HP pump and accessories (special accessories, order no. 4.730-059). This filter removes dirt from incoming water. Î As the standard coupling system is not suitable for use in suction mode, the Kärcher suction hose with integrated filter should be used instead (special accessory, order no. 4.440-238) and suspended inside the water butt.
Interrupting operation Detergents Î Release the lever on the trigger gun. Î During breaks, use the safety catch to secure the trigger gun lever. Î During longer breaks (more than 5 minutes), also turn the appliance off using the ON/OFF switch. To ensure a trouble-free operation of the appliance and to match the individual cleaning task, we recommend our Kärcher detergent and maintenance agents. Please ask for our advice, or request information on the products.
Troubleshooting You can rectify minor faults yourself with the help of the following overview. If in doubt, please consult the authorized customer service. Risk of injury Always switch off the appliance and pull out the mains plug before care and maintenance work. Warning Repair works may only be performed by the authorized customer service. Appliance does not start Î Check whether the voltage indicated on the type plate corresponds to the voltage of the socket. Î Check the power cable for damage.
Specifications K 4.86 M (1.636-423) Connected load Working pressure Max. permissible pressure Water flow rate Sound pressure level LpA (EN60704-1) Sound power level LWA (2000/14/EG) Weight with accessories K 5.86 M (1.630-303) Connected load Working pressure Max. permissible pressure Water flow rate Sound pressure level LpA (EN60704-1) Sound power level LWA (2000/14/EG) Weight with accessories K 4.86 M / K 5.86 M Power connection Voltage 1~50 Hz Mains fuse (slow-blow) Protective class Water connection Max.
A Alfred Kärcher Ges.m.b.H. Lichtblaustraße 7 1220 Wien (01) 25 06 00 ☎ AUS Kärcher Pty. Ltd. 40 Koornang Road Scoresby VIC 3179 (03) 9765 - 2300 ☎ B / LUX Kärcher N.V. Industrieweg 12 2320 Hoogstraten 0900 - 33 444 33 ☎ BR Kärcher Indústria e Comércio Ltda. Av. Prof. Benedicto Montenegro 419 CEP 13.
