Use and Care Manual

English 7
Î STEP 1:
Insert joints (A) into handle. Use one 1/4” bolt
(C) and tighten with one 1/4” nut (B) on each
side. Hand tighten.
Î STEP 2:
Attach the handle to the frame of the pressure
washer.
Align holes, insert one 5/16” bolt (E), and
tighten the knob (D) on each side.
Î STEP 3:
Mount the gun/hose storage handle.
Î STEP 4:
Mount the nozzle holder with enclosed nylon
rivets to the handle.
Î STEP 5:
Fasten the rubber grommets and the finishing
plug in the nozzle holder.
M Nylon rivet Nozzle holder assembly 4
N Rubber grommets Nozzle holder assembly 4
O Finishing plug Nozzle holder assembly 1
Description Purpose Illustration Qty
Assembling