B 60 W Bp R e w gis w w. te ka r a er n ch d er .
Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent owners. Contents Safety instructions . . . . . . . Function . . . . . . . . . . . . . . . Proper use . . . . . . . . . . . . . Environmental protection . . Warranty . . . . . . . . . . . . . . . Operating and Functional Elements . . . . . . . . . . . . . . . . . Before Startup. . . . . . . . . . . Operation . . . . . . . . . . . . . .
Operating and Functional Elements Illustration of scrubbing vacuum 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 4 Vacuum bar lowering lever Cover dirt water reservoir Holding rail for home base Fluff filter Wastewater reservoir rinsing system (option) Flexible lock of rinsing system (option) Lock of wastewater reservoir Float Push handle Coarse dirt sieve Dirt water reservoir Fresh water reservoir filler neck Suction hose for detergent (only DOSE model) Detergent bottle (only DOSE model) Lock
Operator console Before Startup Installing the Brushes BD model The disc brush must be installed before the initial operation (see "Maintenance work"). BR model The brushes are mounted. Install batteries Install the batteries (see "Care and Maintenance/Install and connect batteries").
Unloading Filling in detergents Danger Risk of injury. Pull the Intelligent Key to take all functions out of operation immediately. Install the batteries and connect them (see "Care and Maintenance/Install and connect batteries"). Place long lateral boards of the packaging as a ramp next to the pallet. Fresh water Open the lock of the fresh water reservoir. Fill fresh water (maximum 60 °C) until the lower edge of the filling nozzle. Close the lock of the fresh water reservoir.
– Power Clean: High brush speed for polishing, crystallising and sweeping. Turn the program selection switch to the desired cleaning program. Turn the info button until the desired parameter is displayed. Press Info button - the set value blinks. Set the desired value by turning the info button. Confirm the changed setting by pressing the Info button or wait till the set value is automatically accepted after 10 seconds. Remove the Intelligent Key. Charge battery, if required.
Transport Maintenance schedule Danger Risk of injury! When loading or unloading the machine, it may only be operated on gradients of max. incline (see "Technical Specifications"). Drive slowly. Caution Risk of injury and damage! Observe the weight of the appliance when you transport it. Raise the cleaning head to avoid damage to the brushes. Remove the brush to avoid damage to the brushes. Maintenance intervals Recommended cleaning processes are shown on the display at certain cleaning intervals.
Replace or turn vacuum lips Note: The brush rollers must be replaced when the bristle length has reached 10 mm. Insert a new brush roller. Reassemble the bearing lid in the reverse sequence. Repeat process on the opposite side. Replacing the disk brushes Lift the cleaning head. Press the pedal for changing the brushes downward beyond its resistance. 1 2 Wear indicator Vacuum lip The vacuum lips must be replaced or reversed if they are worn down to the wear indicator. Remove the vacuum bar.
Batteries Please observe the following warning notes when handling batteries: Observe the directions on the battery, in the instructions for use and in the vehicle operating instructions Wear eye protection Recommended batteries, B 60 Order No. Description 6.654-141.01) 105 Ah - maintenance-free 12 V* 6.654-242.02) 170 Ah - maintenance-free 6 V** 6.654-124.03) 180 Ah - maintenance-free 6 V** 6.654-086.
Faults Danger Risk of injury! Before working on the appliance, remove the Intelligent Key and the mains plug of the charger. Drain and dispose of the dirt water and the residual fresh water. Faults with display Display Remedy ERR_I_BÜRSTE_049 Check if foreign matters block the brushes; remove foreign matter if required. ERR_I_TURB_050 Check suction turbine for contamination and clean it if necessary. ERR_U_BATT_001 Check battery; charge it if required.
Accessory B 60 BR appliances B 60 W Bp (brush roller accessories) Part no.: Description Working width 650 mm Part no.: Working width 550 mm Brush roller, red (medium, standard) 6.906-934.0 6.906-935.0 Also for regular cleaning of heavily dirtied 1 floors. 2 Brush roller, white (soft) 6.906-977.0 6.906-981.0 For polishing and cleaning sensitive floors. 1 2 Brush roller, orange (high/ low) 6.906-978.0 6.906-982.0 For scrubbing structured floors (safety tiles, etc.).
Technical specifications BR appliance B 60 R 55 R 65 BD appliance B 60 R 75 D 55 D 65 D 75 Power Nominal voltage V 24 Battery capacity Ah (5h) Average power consumption W 2100 Drive motor output (rated output) W 300 Suction engine output W 580 Brush engine output W 2 x 600 Vacuum power, air volume (max.) l/s 22 Vacuuming power, negative pressure (max.
http://www.kaercher.
