B 40 C Bp B 40 W Bp R e w gis w w. te ka r a er n ch d er .
Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent owners. Contents Safety instructions . . . . . . . Function . . . . . . . . . . . . . . . Proper use . . . . . . . . . . . . . Environmental protection . . Warranty . . . . . . . . . . . . . . . Operating and Functional Elements . . . . . . . . . . . . . . . . . Before Startup. . . . . . . . . . . Operation . . . . . . . . . . . . . .
Operating and Functional Elements Illustration of scrubbing vacuum 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 4 Vacuum bar lowering lever Cover dirt water reservoir Holding rail for home base Fluff filter Wastewater reservoir rinsing system (option) Flexible lock of rinsing system (option) Lock of wastewater reservoir Float Push handle Coarse dirt sieve Dirt water reservoir Fresh water reservoir filler neck Suction hose for detergent (only DOSE model) Detergent bottle (only DOSE model) Lock of the
Operator console Before Startup Installing the Brushes BD model The disc brush must be installed before the initial operation (see "Maintenance work"). BR model The brushes are mounted. Install batteries Install the batteries (see "Care and Maintenance/Install and connect batteries").
Insert the suction hose. Unloading Danger Risk of injury. Pull the Intelligent Key to take all functions out of operation immediately. Insert batteries and connect (see "Before Start-up"). Place long lateral boards of the packaging as a ramp next to the pallet. Fix the ramp on the pallet with nails. Place short boards as a support underneath the ramp. Remove the wooden bars in front of the wheels. Lift the cleaning head by pressing the pedal all the way down.
Setting the parameters With yellow Intelligent Key Parameters for the different cleaning programmes are preset in the appliance. Depending on the authorisation of the yellow Intelligent Key, individual parameters can be changed. If you wish to permanently change the parameters, you must use a grey Intelligent Key. This adjustment procedure is described in the section "Grey Intelligent Key“. Note: Almost all displayed text regarding parameter adjustment is self-explanatory.
After all desired parameters have been modified, turn the info button until "Exit menu" is displayed. Press the info button - you will exit the menu. Setting the language Press Info button - the set value blinks. Set the desired language by turning the info button. Confirm the changed setting by pressing the Info button or wait till the set value is automatically accepted after 10 seconds. Brush trailing Adjust the trailing time of the brushes. Same adjustment as "Set language".
Press the release button of the storage cover. Swivel the storage cover to the side. Pull out the brush rollers. Note: The brush rollers must be replaced when the bristle length has reached 10 mm. Insert new brush rollers. Swivel the storage cover back and press it closed on the push button. Replace or turn vacuum lips 1 2 Replacing the disk brushes Lift the cleaning head. Press the pedal for changing the brushes downward beyond its resistance.
Danger Danger of explosion. Do not put tools or similar on the battery, i.e. on the terminal poles and cell connectors. Risk of injury. Ensure that wounds never come into contact with lead. Always clean your hands after having worked with batteries. Recommended batteries, B 40 Order No. Description 6.654-141.0 105 Ah - maintenance-free 1) 12 V* 6.654-093.02) 70 Ah - maintenance- 12 V* free 6.654-097.
Faults Danger Risk of injury! Before working on the appliance, remove the Intelligent Key and the mains plug of the charger. Drain and dispose of the dirt water and the residual fresh water. Faults with display Display ERR_I_BÜRSTE_049 ERR_I_TURB_050 ERR_U_BATT_001 Remedy Check if foreign matters block the brushes; remove foreign matter if required. Check suction turbine for contamination and clean it if necessary. Check battery; charge it if required.
Accessory B 40 BR appliance B 40 (brush roller accessories) Description Part no.: Working width 550 mm Appliance requires Part no.: Working width 450 mm Packaging unit Description Brush roller, red (medium, stand- 4.762-392.0 4.762-393.0 Also for regular cleaning of heavily dirtied floors. ard) 1 2 Brush roller, white (soft) 4.762-405.0 4.762-409.0 For polishing and cleaning sensitive floors. 1 2 Brush roller, orange (high/ low) 4.762-406.0 4.762-410.
Technical specifications BR appliance B BD appliance B 40 40 R 45 R 55 D 43 D 51 Power Nominal voltage Battery capacity Medium power pickup B 40 W (B 40 C) Nominal power of drive motor B 40 W (B 40 C) Suction engine output Brush engine output Vacuuming Vacuum power, air volume (max.) Vacuuming power, negative pressure (max.) Cleaning brushes Brush speed Dimensions and weights Theoretical surface cleaning performance Max. working range incline B 40 C; B 40 W Fresh/dirt water reservoir volume Max.
http://www.kaercher.
