Manual

QUICKSTART
5.964-043.0 03/12
Operation
1
A Starting the machine
A Sit on the seat and set main switch to "1".
2
A
D
B
E
C Driving
A Set programme switch to step 1 (driving).
B Drive forward
Set the drive direction using the drive
direction button at the operator console.
C Reverse drive
Set the drive direction using the drive
direction button at the operator console.
D Determine the driving speed by pressing
the drive pedal.
E Stop the machine: Release the drive pedal.
3
Cleaning Programs
A Scrubbing suction
Wet clean the floor and vacuum up dirt water.
B Wet scrubbing
Wet clean the floor and allow the detergent
to react.
C Vacuuming
Vacuum the wastewater.
D Polishing
Polishing the floor without the application
of liquid.
E Scrub the floor without applying water
(vacuum polishing)
Polish the floor without applying any fluid and
suck in the polishing dust.
F Manual cleaning
Apply liquid detergent using the wall-ceiling-
floor nozzle (optional) and vacuum it again.
4
A Info button
Use the Info button to select the menu items
and do the settings.
A Turning the button to the right/left scrolls
through the menus forward/ backward.
The selected setting gets accepted by
pressing the button.