SDS

Floor cleaning and care for sealed wood RM 534
Safety Data Sheet
according to US OSHA Hazard Communication Standard (HCS 2012); 29 CFR Part 1910.1200
10/27/2017
US-OSHA - en
3/8
6.3. Methods and material for containment and cleaning up
Methods for cleaning up
:
Take up liquid spill into absorbent material. Mechanically recover the product. Take up mechanically
(sweeping, shoveling) and collect in suitable container for disposal.
Other information
:
Shovel into suitable and closed container for disposal. Disposal must be done according to official
regulations.
6.4. Reference to other sections
Information for safe handling. See section 7. Concerning personal protective equipment to use, see section 8. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:
Ensure good ventilation of the work station. Wear personal protective equipment. Avoid contact with
skin and eyes.
Hygiene measures
:
Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures
:
Does not require any specific or particular technical measures.
Storage conditions
:
Store in a well-ventilated place. Keep cool.
Information about storage in one common storage
facility
:
Keep away from food, drink and animal feeding stuffs.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
ethanol (64-17-5)
ACGIH
Local name
Ethanol
ACGIH
ACGIH STEL (ppm)
1000 ppm
ACGIH
Remark (ACGIH)
URT irr
ACGIH
Regulatory reference
ACGIH 2017
OSHA
OSHA PEL (TWA) (mg/m³)
1900 mg/m³
OSHA
OSHA PEL (TWA) (ppm)
1000 ppm
OSHA
Regulatory reference (US-OSHA)
OSHA
Poly(oxy-1,2-ethandiyl).alpha.-tridecyl-.omega.-hydoxy-,branched (69011-36-5)
Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls
:
Ensure good ventilation of the work station.
Environmental exposure controls
:
Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Hand protection:
Protective gloves. Does not require any particular or specific measures. Respect the general rules for occupational hygiene.
Gloves must be replaced after each use and whenever signs of wear or perforation appear. Choosing the proper glove is a
decision that depends not only on the type of material, but also on other quality features, which differ for each manufacturer
Eye protection:
Sealed safety goggles. Use splash goggles when eye contact due to splashing is possible. Wear closed safety glasses. EN 166
Skin and body protection:
Wear suitable protective clothing
Respiratory protection: