Safety data sheet

Floor cleaning and care for sealed wood RM 534
Safety Data Sheet
according to US OSHA Hazard Communication Standard (HCS 2012); 29 CFR Part 1910.1200
03/17/2020 US-OSHA - en 3/8
6.3. Methods and material for containment and cleaning up
Methods for cleaning up : Take up liquid spill into absorbent material. Take up mechanically (sweeping, shoveling) and collect in
suitable container for disposal.
Other information : Shovel into suitable and closed container for disposal. Disposal must be done according to official
regulations.
6.4. Reference to other sections
Information for safe handling. See section 7. Concerning personal protective equipment to use, see section 8. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling :
Ensure good ventilation of the work station. Wear
personal protective equipment. Avoid contact with
skin and eyes.
Hygiene measures :
Do not eat, drink or smoke when
using this product. Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures :
Does not require any specific or particular
technical measures.
Storage conditions : Store in a well-ventilated place. Keep cool.
Maximum storage period : 2 year(s)
Storage temperature : 39 – 86 °F
Information about storage in one common storage
facility
:
Keep away from food, drink and animal feeding stuffs
.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Floor cleaning and care for sealed wood RM 534
No additional information available
Ethanol (64-17-5)
USA - ACGIH - Occupational Exposure Limits
Local name
Ethanol
ACGIH STEL (ppm)
1000 ppm
Remark (ACGIH) TLV® Basis: URT irr. Notations: A3 (Confirmed Animal Carcinogen with Unknown Relevance
to Humans)
Regulatory reference
ACGIH 2019
USA - OSHA - Occupational Exposure Limits
Local name
Ethyl alcohol (Ethanol)
OSHA PEL (TWA) (mg/m³)
1900 mg/m³
OSHA PEL (TWA) (ppm)
1000 ppm
Regulatory reference (US
-
OSHA)
OSHA Annotated Table Z
-
1
Isotridecanol, ethoxylated (9043-30-5)
No additional information available
8.2. Appropriate engineering controls
Appropriate engineering controls :
Ensure good ventilation of the work station.
Environmental exposure controls :
Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Hand protection:
In case of repeated or prolonged contact wear gloves. Chemically resistant protective gloves. Nitrile rubber. EN 374. Gloves must be replaced after each use
and whenever signs of wear or perforation appear. Choosing the proper glove is a decision that depends not only on the type of material, but also on other
quality features, which differ for each manufacturer. Please follow the instructions related to the permeability and the penetration time provided by the
manufacturer
Eye protection: