Product information

Product information RM 784
Application:
Coating
■ The surface must be free from care 󰘰lm residues and dirt (pH 7-8.5). The
surface must be dry.
■ Do not dilute or mix product with other products.
■ Application quantity depending on absorbency and type of 󰘱oor: 1st coat:
about 20 - 40 ml/m², 2nd coat: about 15 - 25 ml/m². Yield depending on
application quantity.
■ Distribute product evenly, sparingly, quickly and overlapping (wet on wet)
using a 󰘱at or articulated mop.
■ Allow to dry completely between applications (about 20 minutes, depend-
ing on humidity and temperature).
■ Repeat as necessary (2 coats recommended). Apply product crosswise.
■ Walkable after fully dry (about 3 hours).
■ Suitable for normal tra󰘲c after about 24 hours.
■ Fully hardens after about 14 days.
Spray Cleaner
■ Surface must be free from dirt.
■ Dilute product depending on care 󰘰lm damage.
■ Apply care agent solution to the area to be treated with a sprayer.
■ Polish surface immediately with device.
Wipe restoration
■ Surface must be free from dirt.
■ Dilute product depending on care 󰘰lm damage.
■ Apply care agent solution to the area to be cleaned in sections with a
󰘱at or articulated mop. Distribute product evenly, sparingly, quickly and
overlapping (wet on wet).
■ Allow to dry completely (about 20 minutes, depending on humidity and
temperature).
■ Repeat process if nec.
■ When completely dry, polish with a single disc machine (optional).
Wipe care
■ Surface must be free from dirt.
■ Dilute the product depending on the desired degree of cleaning.
■ Clean surface manually with a damp mop.
Instructions for use:
■ Do not apply to water-sensitive surfaces.
■ Do not apply to wood or unsealed parquet 󰘱ooring.
■ Carry out an adhesion test on factory treated 󰘱oors.
■ Store away from frost.
■ Only store in original container between 5 and 30°C.
■ Do not put product residues back in the container.
■ Close the container immediately after use.
■ Clean the cleaning machine after use.
Warnings and safety recommendations accord-
ing to EC Directives:
■ Z 20 Contains tributoxyethyl phosphate. May cause allergic reactions.
Further information:
■ Material Safety Data Sheet (MSDS)
■ Quick Start
■ Expertise relating to anti-slip properties according to DIN 51131 and DIN
EN 13893
■ FIGR expertise (Forschungs- und Prü󰘰nstitut für Facility Management
GmbH)
Dosage and yield:
Contents: Cleaning method: Primary mixture: Dosage: Soiling: Yield:
1000 ml Coating %undiluted 20-30 m²
1000 ml Spray Cleaner 20-30 % 120-300 m²
1000 ml Wipe restoration 30-50 % 100-200 m²
1000 ml Wipe care 1-3 % 1000-6000 m²
Please contact us for more information: Alfred Kärcher SE & Co. KG
Alfred-Kärcher Straße 28-40
71364 Winnenden
Phone [phone]
Fax [phone]
www.kaercher.com