Product information

Product information RM 784

FloorPro Care Dispersion RM

784

Polymer dispersion for initial, interim and maintenance care

of 󰘱oor coverings. Forms an anti-slip, dirt-repellent and

abrasion resistant protective 󰘰lm. High covering power.

Properties

■ Produces a semi-matte gloss

■ covers with just two coats

■ very short drying time

■ highly dirt-repellent

■ smear-resistant due to high resistance to cleaning agents

■ much greater area coverage in maintenance cleaning

■ worn areas are easy to repair, e.g. walkways, footprints, chair marks

■ also suitable for normal cleaning (spray cleaner, wiping) and mainte-

nance cleaning (mopping)

■ suitable for removing care 󰘰lm without water

■ excellent 󰘱ow properties

■ easy to repolish

■ slip-resistant according to DIN 51131 und DIN EN 13893 (depending on

󰘱oor covering)

Application areas:

Building cleaning: Floor care

Municipal: Floor care

Hotels, gastronomy, catering: Floor care

Nursing and retirement homes,

doctor’s surgeries:

Floor care

Retail: Floor care

Usage options

■ manual

■ Spray units

■ Single disc machines

7.6

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14

in concentrate

acidic slightly acidic neutral slightly alkaline alkaline

Container sizes Part number

5 l 6.295-817.0

PAGE 1
Product information RM 784 FloorPro Care Dispersion RM 784 Polymer dispersion for initial, interim and maintenance care of floor coverings. Forms an anti-slip, dirt-repellent and abrasion resistant protective film. High covering power. Properties ■ Produces a semi-matte gloss ■ covers with just two coats ■ very short drying time ■ highly dirt-repellent ■ smear-resistant due to high resistance to cleaning agents ■ much greater area coverage in maintenance cleaning ■ worn areas are easy to repair, e.g.
PAGE 2
Product information RM 784 Application: Instructions for use: Coating ■ Do not apply to water-sensitive surfaces. ■ The surface must be free from care film residues and dirt (pH 7-8.5). The surface must be dry. ■ Do not dilute or mix product with other products. ■ Application quantity depending on absorbency and type of floor: 1st coat: ■ Do not apply to wood or unsealed parquet flooring. ■ Carry out an adhesion test on factory treated floors. ■ Store away from frost.