Operating instructions

ManualsBrandsKärcher ManualsCleaning and care productsFloorPro Care Dispersion RM 784, 5l

QUICKSTART

5.965-281.0 05/14

Care dispersion RM 784

Care treatment

몇 WARNING

These are only brief instructions! Please read the product information and observe the safety information

on the product label prior to using the detergent. Follow the dosing instructions on the product label.

The non-compliance with the safety information can cause damage to the object to be cleaned and risks

for the environment, the user and other persons.

Preparation

ABCA Deep clean the floor covering, check the

pH-value. Nominal value: 7 - 8.5.

B Mask surfaces that are not to be treated.

Hold work materials available.

C Carefully tilt the container prior to use, do not

shake.

Coating

A B C A Apply the undiluted product (approx. 20-

40 ml/m², depending on the floor covering) to

the floor. Work in sections of max. 10 m².

B Spread the care dispersion swiftly in thin lay-

ers and overlapping paths towards the door.

C Allow the care film applied to dry completely,

do not step on the surface (approx. 30 min-

utes, depending on the indoor climate).

D After it has dried completely, apply a second

layer. Depending on the floor covering

(approx. 15-25 ml/m²).

Curing

AB A If necessary, set up a drying fan. Drying time

without drying fan at least 3 hours.

B Ready to walk on after 3 hours.

Resilient after approx. 24 hours.

Completely cured after approx. 2 weeks.

Note

The drying times depend on the indoor climate.

Summary of content (6 pages)

PAGE 1
QUICKSTART Care dispersion RM 784 Care treatment 몇 WARNING These are only brief instructions! Please read the product information and observe the safety information on the product label prior to using the detergent. Follow the dosing instructions on the product label. The non-compliance with the safety information can cause damage to the object to be cleaned and risks for the environment, the user and other persons. Preparation 1 A B C A Deep clean the floor covering, check the pH-value.
PAGE 2
QUICKSTART Care dispersion RM 784 Spray-cleaner procedure 몇 WARNING These are only brief instructions! Please read the product information and observe the safety information on the product label prior to using the detergent. Follow the dosing instructions on the product label. The non-compliance with the safety information can cause damage to the object to be cleaned and risks for the environment, the user and other persons. Preparation 1 A B C A Hold work materials available.
PAGE 3
QUICKSTART Polishing (optional) 4 A A If desired, polish the floor covering after curing. Clean accessories immediately after use. 5.965-281.
PAGE 4
QUICKSTART Care dispersion RM 784 Wiping refurbishment 몇 WARNING These are only brief instructions! Please read the product information and observe the safety information on the product label prior to using the detergent. Follow the dosing instructions on the product label. The non-compliance with the safety information can cause damage to the object to be cleaned and risks for the environment, the user and other persons. Preparation 1 A B C A Hold work materials available.
PAGE 5
QUICKSTART Polishing (optional) 4 A A If desired, polish the coated floor covering after curing in order to conform the new care film to the existing care film. Clean accessories immediately after use. 5.965-281.
PAGE 6
QUICKSTART Care dispersion RM 784 Wiping care for revitalisation 몇 WARNING These are only brief instructions! Please read the product information and observe the safety information on the product label prior to using the detergent. Follow the dosing instructions on the product label. The non-compliance with the safety information can cause damage to the object to be cleaned and risks for the environment, the user and other persons. Preparation 1 A B C A Hold work materials available.