Safety data sheet

ManualsBrandsKärcher ManualsCleaning and care productsSurfacePro Surface Cleaner CA 30 C eco!perform, 1l

Page 4/10

Safety data sheet

according to 1907/2006/EC, Article 31

Printing date 03.12.2021 Revision: 13.11.2019Version number 4 (replaces version 1)

Trade name:

SurfacePro Surface Cleaner CA 30 C eco!perform

(Contd. of page 3)

53.2.5

SECTION 8: Exposure controls/personal protection

8.1 Control parameters

Ingredients with limit values that require monitoring at the workplace:

The product does not contain any relevant quantities of materials with critical values that have to be monitored

at the workplace.

DNELs

67-63-0 propan-2-ol

Oral DNEL 26 mg/kg*d (consumer)

Dermal DNEL 888 mg/kg*d (employee)

319 mg/kg*d (consumer)

Inhalative DNEL 500 mg/m3 (employee)

89 mg/m3 (consumer)

PNECs

67-63-0 propan-2-ol

PNEC 140.9 mg/l (freshwater)

140.9 mg/l (marine water)

140.9 mg/l (STP)

2,251 mg/l (STP)

PNEC sediment 552 mg/kg (freshwater)

552 mg/kg (marine water)

PNEC soil 28 mg/kg (soil)

8.2 Exposure controls

Appropriate engineering controls

No further data; see item 7.

Individual protection measures, such as personal protective equipment

General protective and hygienic measures

Wash hands before breaks and at the end of work.

Do not inhale gases / fumes / aerosols.

Respiratory protection:

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure

use self-contained respiratory protective device.

Not necessary if room is well-ventilated.

Hand protection

The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.

Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/

the chemical mixture.

Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation

Material of gloves

The selection of the suitable gloves does not only depend on the material, but also on further marks of quality

and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the

resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the

application.

(Contd. on page 5)