Safety data sheet

ManualsBrandsKärcher ManualsCleaning and care productsThermo wax CP 945, 20l

Page 5/10

Safety data sheet

according to 1907/2006/EC, Article 31

Printing date 18.06.2021 Revision: 11.06.2021Version number 6 (replaces version 5)

Trade name:

VehiclePro Thermo Wax CP 945

(Contd. of page 4)

53.0.1

Penetration time of glove material

The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be

observed.

Eye/face protection

Goggles recommended during refilling.

SECTION 9: Physical and chemical properties

9.1 Information on basic physical and chemical properties

General Information

Physical state

Fluid

Colour:

Yellow

Odour:

Specific type

Odour threshold:

Not determined.

Melting point/freezing point:

0 °C

Boiling point or initial boiling point and boiling

range

100 °C

Flammability

Not applicable.

Lower and upper explosion limit

Lower:

Not determined.

Upper:

Not determined.

Flash point:

Not applicable

Auto-ignition temperature:

Product is not selfigniting.

Decomposition temperature:

Not determined.

pH at 20 °C

4.5

pH-value 1 %:

6-8

Viscosity:

Kinematic viscosity

Not determined.

dynamic at 20 °C:

8 mPas

Solubility

Water:

Fully miscible

Partition coefficient n-octanol/water (log value)

Not determined.

Vapour pressure:

Not determined.

Density and/or relative density

Density at 20 °C:

0.994 g/cm³

Relative density

Not determined.

Vapour density

Not determined.

9.2 Other information

Appearance:

Form:

Fluid

Important information on protection of health

and environment, and on safety.

Ignition temperature:

not applicable

Explosive properties:

Product does not present an explosion hazard.

Solvent content:

Organic solvents:

2.5 %

VOC (EC)

1.54 %

(Contd. on page 6)