Safety data sheet

Page 5/12
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 26.11.2021 Revision: 25.11.2021Version number 6 (replaces version 5)
Trade name:
WaterPro Active Chlorine RM 852
(Contd. of page 4)
53.1.25
·
Information about storage in one common storage facility:
Store away from flammable substances.
Do not store together with acids.
Keep away from food, beverages and feed.
·
Further information about storage conditions:
Store receptacle in a well ventilated area.
Store under lock and key and out of the reach of children.
Keep receptacle tightly sealed.
·
7.3 Specific end use(s)
No further relevant information available.
*
SECTION 8: Exposure controls/personal protection
·
8.1 Control parameters
·
Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored
at the workplace.
·
8.2 Exposure controls
·
Appropriate engineering controls
No further data; see item 7.
·
Individual protection measures, such as personal protective equipment
·
General protective and hygienic measures
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
·
Respiratory protection:
Filter B2 - P2.
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure
use self-contained respiratory protective device.
Not necessary if room is well-ventilated.
·
Hand protection
* chemical resistant protective gloves (EN 374)
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Protective gloves.
·
Material of gloves
Butyl rubber, BR
·
Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
·
For the permanent contact gloves made of the following materials are suitable:
* butyl rubber 0,7 mm, 480 min (EN 374)
·
As protection from splashes gloves made of the following materials are suitable:
PVC or PE gloves
(Contd. on page 6)
GB