Safety data sheet

Page 5/11
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 06.08.2021 Revision: 11.05.2020Version number 6 (replaces version 1)
Trade name:
PressurePro Phosphating Agent RM 48
(Contd. of page 4)
53.0.1
·
Individual protection measures, such as personal protective equipment
·
General protective and hygienic measures
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Do not inhale gases / fumes / aerosols.
Avoid contact with the eyes and skin.
·
Respiratory protection:
Filter A/P2.
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure
use self-contained respiratory protective device.
Not necessary if room is well-ventilated.
·
Hand protection
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Protective gloves.
·
Material of gloves
Butyl rubber, BR
·
Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
·
For the permanent contact gloves made of the following materials are suitable:
* butyl rubber 0,7 mm, 480 min (EN 374)
·
As protection from splashes gloves made of the following materials are suitable:
* nitril rubber 0,4 mm, 30 min (EN 374)
·
Eye/face protection
Tightly sealed goggles (EN 166)
·
Body protection:
Light weight protective clothing
SECTION 9: Physical and chemical properties
·
9.1 Information on basic physical and chemical properties
·
General Information
·
Physical state
Fluid
·
Colour:
Yellow
·
Odour:
Product specific
·
Odour threshold:
Not determined.
·
Melting point/freezing point:
-7 °C
·
Boiling point or initial boiling point and boiling
range
100 °C
·
Flammability
Not applicable.
(Contd. on page 6)
EU