Safety data sheet

Page 4/10
Safety Data Sheet
according to WHS Regulations
Printing date 18.06.2021 Revision: 05.05.2021Version number 3
Trade name:
VehiclePro Brush Shampoo RM 811 Classic
(Contd. of page 3)
53.0.1
7 Handling and Storage
·
Handling
·
Precautions for safe handling
Avoid contact with eyes and skin.
·
Information about fire - and explosion protection:
No special measures required.
·
Conditions for safe storage, including any incompatibilities
·
Storage
·
Requirements to be met by storerooms and receptacles:
No special requirements.
·
Information about storage in one common storage facility:
Keep away from food, beverages and feed.
·
Further information about storage conditions:
None.
·
Specific end use(s)
No further relevant information available.
8 Exposure controls and personal protection
·
Additional information about design of technical facilities:
No further data; see item 7.
·
Control parameters
·
Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored
at the workplace.
·
Exposure controls
·
Personal protective equipment
·
General protective and hygienic measures
Wash hands before breaks and at the end of work.
·
Respiratory protection:
Not necessary if room is well-ventilated.
·
Protection of hands:
* chemical resistant protective gloves (EN 374)
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
·
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the
resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the
application.
·
Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
·
For the permanent contact gloves made of the following materials are suitable:
* butyl rubber 0,7 mm, 480 min (EN 374)
·
As protection from splashes gloves made of the following materials are suitable:
* nitril rubber 0,4 mm, 30 min (EN 374)
·
Not suitable are gloves made of the following materials:
Strong material gloves
(Contd. on page 5)
AU