Operating instructions
Operation and Safety Guide
Hard Surface Cleaner
Model # BR 40/10 C
On Your Apron as Karcher North America
Tool Tips & Safety Guide BR 40/10 C 8.644-845.0 - A 03/05/21
Page 2 of 4
Tool Operation:
A. Connect an extension cable with sufficient
cross-section.
Always unwind extension cord completely.
Insert the end of the extension cable as a loop
in the strain relief clamp.
B. Plug in the main plug.
CAUTION
Risk of Damage: Only use the recommended
detergents. With respect to different detergents, the
operator bears the increased risk regarding the
operational safety accident risk and reduction product
life of appliance. Only use detergents that are free
from solvents, hydrochloric acid and other
hydrofluoric acid.
Follow the safety instructions for using detergents.
Note: Do not use highly form and detergents. Observe
the dosing notes.
A. Open the cover of the freshwater reservoir.
Pour in water/detergent mixture. Maximum
temperature of liquid 50°C.
Close the cover of the freshwater reservoir
Short Distances, Level Ground
B.
Place the slider vertically.
C. Pull out the rotary handle for the brush contact
pressure and set it to the drive position.
Use the pushing handle to push the appliance to
the place of use.
Long Distances, Uneven Grounds
A.
Place the slider vertically until the lock up.
B. Install transport wheels.
CAUTION
Danger of damage due to leaking water. Remove the
waist water and fresh water reservoirs before tilting
the appliance.
C. Remove the filled waste and fresh water
reservoirs from the appliance and transport
them separately.
D. Tilt appliance to the side and drive it to the
place of use on its transportation wheels.
If the transfer wheels hinder the use of the appliance:
E. Press the transport wheel release button and
pull the transfer wheel out.
F. Insert the transport wheels into their older until
they stop.
A
B
C
A
B
C
D
E
F
A
B
1
3
2
Start Up