Operating instructions
Operation and Safety Guide
Hard Surface Cleaner
Model # BR 40/10 C
On Your Apron asKarcher North America
Tool Tips & Safety Guide BR 40/10 C 8.644-845.0 - A 03/05/21
Page 1 of 4
Vendor Website: http://hdtr.karcher.com Support Phone No. 800-821-6490
SAFETY TOPICS:
Read and understand the operator’s
Manual or “Operations and Safety Guide”
before using this machine.
Failure to
follow operating instructions
could
result in death or serious injury.
Please visit http://hdtr.karcher.com
WARNING: Wear a disposable mask,
gloves, and eye protection while
operating machine. For some units with
filters, a full face mask, and goggles are
required.
WARNING: This product can expose
you to chemicals including lead, Di(2-
ethylhexyl) phthalate and Diisononyl
phthalate, which are known to the State of
California to cause cancer and
reproductive harm. For more information
go to www.P65Warnings.ca.gov
SAFETY CHECKLIST:
Connect to a properly grounded 120 volt
outlet.
Check brushes for debris or damage to the
floor may accrue.
Never let the BR 40/10 C run
unattended
even for a brief moment.
Turn off when the
machine is
to be left unattended.
Do not use if electrical cord is damaged.
Do not handle the electrical plug or
machine with wet hands.
Use only indoors, do not expose to rain.
Tool Application:
The BR 40/10 C is used to scrub hard surfaces such as tile, smooth
concrete. It is perfect for home and commercial use.
Cleaning
Tips:
Be sure to sweep floors before using the BR 40/10 C hard surface cleaner for
best results and to avoid damage to the floors and the machine.
Only use detergents free of solvents and acids.