Operating instructions

PCL 4
59690300
(07/19)
E
nglish
Dear Customer,
Actuating the motor overload switch caus-
es the device to switch off unexpectedly.
This is not due to an error with the device
but an intentional protective function.
Please observe the following instructions
for use:
 Use the device on wooden, stone, or
composite material (WPC) surfaces on-
ly.
 Always use suitable brushes.
 Do not exert too much pressure on the
device during cleaning.
 Hold the device at a flatter angle during
cleaning.
Should the device unexpectedly switch
off when in use, allow it to cool for at
least 10 minutes. The motor circuit
breaker resets automatically and the de-
vice is ready for operation again.
In case of a repeated shut-down, please
reduce the pressure on the brushes
while cleaning and hold the device at a
flatter angle!
Please observe the operating instructions
supplied with the device, also. These in-
structions can be found as required at
www.kaercher.com.