Operating instructions
BEFORE EACH USE OF YOUR KARCHER PRESSURE WASHER.
READ INSTRUCTION MANUAL THOROUGHLY BEFORE FIRST USE OF YOUR PRESSURE WASHER
· CHECK WATER INLET FILTER IS CLEAR OF DIRT OR DEBRIS.
· CHECK THE WATER SUPPLY HOSE IS A MINIMUM OF 25 FEET LONG
AND UNWOUND FROM THE HOSE REEL.
· ONLY USE A NON-RETURN VALVE AT THE TAP END OF THE SUPPLY
HOSE.
· IF YOU ARE USING AN EXTENSION LEAD CHECK THAT IT IS RATED AT
A MINIMUM OF 13 AMPS AND IS FULLY UNWOUND FROM ITS REEL.
· CONNECT THE WATER SUPPLY, REMOVE THE LANCE, AND SQUEEZE
THE TRIGGER TO RUN WATER THROUGH THE MACHINE BEFORE
SWITCHING THE POWER ON.
5.960-018