Use and Care Manual

6 English

For more detailed information on
how to assemble this high-pressure
washer, please visit
www.karcherresidential.com/assembly
A Philips Screw-
driver, medium
size (not supplied)
for final assembly
Mount loose parts delivered with appli-
ance prior to start-up.
 STEP 1:
Insert the wheel into the body, rotat-
ing the wheel as you push it into
place. You should hear a click when
the wheel is completely inserted.
Then push the hub cap into place on
the wheel, press around edges and
the centre of the hub cap to make
sure it is properly seated. You should
hear another click. Do not proceed
with the assembly until the wheels
are securely installed.
 STEP 2:
Before assembling the handle you
need to place the long tube of the de-
tergent regulator between handle
and machine body.
Slide the transport handle into the
guide and secure it with 2 screws.
 STEP 3:
Insert detergent suction tube onto
the tube fitting.
Install the dosage regulator and con-
nect using 2 screws.
Note: During installation you must
make sure that the tongues of the
dosage regulator match up with the
intended recesses in the casing.
ASSEMBLY INSTRUCTIONS
Required tools
Assembly
Install wheels and hub caps
Install the transport handle
Install the dosage regulator for
detergent