Operating instructions

8.913-996.0 • 8.914-452.0 • 9.807-624.0 • 8.919-013.0 • Rev. 03/20
4
PRESSURE WASHER
OPERATOR’S MANUAL
COMPONENT IDENTIFICATION — SINGLE AXLE MODELS
Pump — Develops high pressure.
Starter Grip— Used for starting the engine manually.
Spray Gun — Controls the application of water and
detergent onto cleaning surface with trigger device.
Includes safety latch.
Detergent Injector — Allows you to siphon and mix
detergents (not shown).
Wand — Must be connected to the spray gun.
High Pressure Hose — Connect one end to water
pump discharge nipple and the other end to spray gun.
Note: If trigger on spray gun is released for more
than 2 minutes, water will leak from valve. Warm
water will discharge from pump protector onto oor.
This system prevents internal pump damage.
Spray Gun
Wand
High Pressure
Hose
Water Inlet
High Pressure
Discharge
Nozzle
Starter
Grip
Pump