HD 9/20-4 M Plus Cold-water pressure washer with tough 4-pole low-speed three-phase motor and Dirt blaster nozzle. 1 2 Save energy and time: EASY!Force high-pressure guns and EASY!Lock quick-release locks. At last – work without getting tired: the EASY!Force high-pressure 3 3 4 Powerful and durable Air-water-cooled electric motors for intensive use. 4-pole low-speed electric motor. gun. EASY!Lock quick-release locks: durable and robust. And five times faster than screws.
TECHNICAL DATA AND EQUIPMENT. HD 9/20-4 M Plus Air/water-cooled motor Save energy and time: EASY!Force high-pressure guns and EASY!Lock quick-release locks. 3-piston pump with ceramic pistons Technical data Order no. 1.524-926.0 EAN code 4054278167367 Current type Ph / V / Hz 3 / 400 / 50 Flow Rate l/h 460 – 900 Operating pressure bar / MPa 40 – 200 / 4 – 20 Max. Pressure bar / MPa 220 / 22 Max.
HD 9/20-4 M PLUS 1.524-926.0 1 2 3 Order no. 4 Flow Rate 5 6 Price 7 Description Trigger guns 1 4.118-005.0 EASY!Force Advanced Conversion kit 1 from high pressure hose 2 4.111-050.0 Conversion kit 2 from device 3 4.111-051.0 Conversion kit 3 only EASY!Force Effortless, not energy-sapping: the EASY!Force high-pressure gun uses the recoil force of the high-pressure jet to reduce the holding force for the operator to zero.
HD 9/20-4 M PLUS 1.524-926.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Order no. Max. working pressure Length Price Description Rotating spray lances 1 4.112-000.0 Spray lance 300 bar 1050 mm 2 2.680-002.0 LED nozzle light Spray lance Spray lance extender 3 4.112-027.0 300 bar 4 4.112-024.0 300 bar 5 4.112-007.0 300 bar 6 4.112-006.0 300 bar 7 4.112-018.0 300 bar 8 4.112-021.0 300 bar 9 4.112-048.0 300 bar 1000 mm 10 2.112-016.
HD 9/20-4 M PLUS 1.524-926.0 17 Order no. Max. working pressure Length Price Description Additional handle Additional handle for EASY!Lock spray lances Comfortable in every situation – the additional handle is easy to attach to the spray lance of our new EASY!Lock generation and makes work easier by allowing you to adjust your posture to suit the particular task. Available accessories. HD 9/20-4 M Plus, 1.524-926.0, 2022-01-19 Included in delivery. 17 4.321-380.
HD 9/20-4 M PLUS 1.524-926.0 1 2 3 Order no. Max. working pressure Nozzle size Price Description Dirt blaster, large Dirt Blaster Nozzle 1 4.114-027.0 300 bar 50 The dirt blaster with rotating pencil jet offers 10 times better cleaning performance. Ceramic nozzle and bearing ring for a long service life. Further data: Max. 300 bar, 30 MPa, 85°C. Triple nozzle with manual nozzle changeover. Convenient spray adjustment.
HD 9/20-4 M PLUS 1.524-926.0 1–4 5, 9, 11 6 7–8, 10 12 15–17 18 19 20 21 ID Max. working pressure Length 1 6.110-031.0 DN 8 315 bar 2 6.110-030.0 DN 8 3 6.110-032.0 DN 8 4 6.110-014.0 DN 8 315 bar 30 m 5 6.110-042.0 DN 10 220 bar 15 m 6 6.110-043.0 DN 10 220 bar 20 m 7 6.110-044.0 DN 10 220 bar 25 m 8 6.110-045.0 DN 10 220 bar 40 m 9 6.110-059.0 DN 12 210 bar 15 m 10 6.110-060.0 DN 12 210 bar 40 m 11 6.110-041.0 DN 10 220 bar 10 m 12 6.110-024.
HD 9/20-4 M PLUS 1.524-926.0 1–4 Order no. Nozzle size Price Description HP nozzle spray angle 0° Power Nozzle 1 2.113-034.0 50 High-pressure nozzle with powerful jet for extremely stubborn dirt. 2 2.113-047.0 55 Fan jet nozzle with 15° spray angle suitable for stubborn dirt. 3 2.113-023.0 50 Fan jet nozzle with 25° spray angle, suitable for large areas and removing stubborn dirt and stains. 4 2.113-055.
HD 9/20-4 M PLUS 1.524-926.0 1 2 3 4 5 6 7–8 9 10 11 12 13 14 15 Order no. Price Description Nozzle union 1 4.112-011.0 Nozzle screws with protectors for high-pressure and power nozzles Stainless steel injector kit for HD 9/20-4M 2 6.645-760.0 Dosing valve for stainless steel injector 3 6.500-000.0 For a working pressure of 300 bar at 95°C water temperature, this stainless steel injector was developed specifically for the HD 9/20-4 M high-pressure cleaner.
HD 9/20-4 M PLUS 1.524-926.0 20 21 Order no. Adapter 7 M18IG-TR20AG 19 4.111-035.0 Adapter 8 TR20IG-M18AG 20 4.111-036.0 Coupler -2xM22x1,5 21 4.111-037.0 ADAPTER for replacement TR22IGM22AG Er Included in delivery. 22 4.111-046.0 22 Price Description Adapter 7 to connect the old spray lance with the new nozzle Adapter 8 to connect the new spray lance with the old nozzle Brass double connector for connecting and extending highpressure hoses. With rubber protection. Connector: 2x M 22 x 1.
HD 9/20-4 M PLUS 1.524-926.0 1–3 4 5 6–7 11 14 15 16 Order no. Max. working pressure Nozzle size 8 Diameter 9 Price 10 Description Pipe cleaning hose, ID 6 Hose assembly TR pipe cleaning DN6 max.2 1 6.110-046.0 250 bar Pipe cleaning hose, DN 6, 20 m, 220 bar Hose assembly TR pipe cleaning DN6 max.2 2 6.110-008.0 250 bar 3 6.110-047.0 250 bar The 10 m pipe cleaning hose is a highly flexible high pressure hose for pipe interior cleaning (threaded connection for nozzle R 1/8).
HD 9/20-4 M PLUS 1.524-926.0 2, 10 3 4 9 11 Order no. 5 Flow Rate Nozzle size 6 Diameter 7 Price 8 Description Hard Surface Cleaner FRV 30 1 2.642-910.0 Extension hose 5 m 2 4.440-939.0 For smooth floors indoors. The squeegee increases the suction performance of the FRV 30 and minimises the amount of water remaining. This means the floor is dry in just a few minutes. 5m extension hose for FRV 30. Connection sleeve included. Add-on kit hose attachment 3 2.642-528.
HD 9/20-4 M PLUS 1.524-926.0 1 2 3 8 9 10 Order no. 4 Flow Rate 5 6 Price 7 Description Cup foam lance 1 4.112-055.0 Cup foam lance Basic 3 900 – 2500 l/h For high-pressure cleaners with a flow rate of 900–2500 l/h: new, robust and very high-quality foam cup lance with outstanding foam quality while consuming half as much cleaning agent. Bottle cleaning agents 1L 2 5.071-414.0 Cup foam lance Advanced 025 3 2.112-017.0 Tank grey only for replacement 1L 4 6.414-050.
HD 9/20-4 M PLUS 1.524-926.0 2 3 4 5 6 7 8 9–10 Order no. Length Price Description Automatic, self-winding hose reels Wall-mounted hose reel 1 2.639-257.0 15 m Add-on kit hose reel plastics 2 6.392-074.0 20 m 3 6.392-083.0 20 m 4 6.392-106.0 20 m 5 6.392-105.0 20 m 6 6.392-076.0 20 m 7 6.392-122.0 20 m Add-on kit hose reel Hose reel, automatic, 20 m, painted Hose reel, automatic, basalt greycoated Hose reel, automatic, 20 m, stainless steel ABS hose reel stainless steel 8 6.
HD 9/20-4 M PLUS 1.524-926.0 1 2–3 4–5 Order no. 7 Flow Rate Water feed temperature Length Length Price Description Telescopic Telescopic lance TL 7 F Telescopic lance TL 7 H Telescopic lance TL 10 H Telescopic lance TL 10 C Telescopic lance TL 14 C TL high pressure adapter Included in delivery. 1 4.580-097.0 max. 40 °C 2 4.762-609.0 max. 60 °C 3 4.762-610.0 max. 60 °C 4 4.762-611.0 max. 60 °C 5 4.762-612.0 max. 60 °C 6 4.762-613.0 max. 60 °C 7 4.775-154.0 max.
HD 9/20-4 M PLUS 1.524-926.0 1–3 Order no. Flow Rate Water feed temperature Length Length Price Description Hoses Included in delivery. 1 6.392-978.0 max. 155 °C 2 6.392-977.0 max. 155 °C 3 6.392-976.0 max. 155 °C High-quality, flexible HP hose (with rubber covering) for the iSolar TL 7. The outer layer has especially good sliding properties when extending and retracting the telescopic rod. High-quality, flexible HP hose (with rubber covering) for the iSolar TL 10.
HD 9/20-4 M PLUS 1.524-926.0 1–2 3 4 Order no. Nozzle size Price Description Wet blasting attachment (without nozzle) Wet blasting attachment with flow control (without nozzles) 1 4.115-000.0 Wet blasting attachment without flow control (nozzles not included) 2 4.115-006.0 Paint, rust and scale removal made easy: Kärcher wet blasting attachment with flow control for adding blasting abrasi- ve to the high-pressure jet.
HD 9/20-4 M PLUS 1.524-926.0 1 2 3 10 11 Order no. 4 6 7 Price 8–9 Description Geka coupling With hose nozzle, R 1" 1 6.388-465.0 with hose barb Hose coupling 2 6.388-458.0 with female thread Water filter 3 6.414-956.0 Suction filter with check valve 4 4.730-012.
HD 9/20-4 M PLUS 1.524-926.0 1 2 3 Order no. 4 Flow Rate Price Description Push-on washing brush Push-on washing brush 1 4.762-497.0 Push-on wash brush, M 18 x 1.5 2 4.113-001.0 With clamp for mounting directly to units' double or triple nozzle. Fits on new double and triple nozzles. Push-on wash brush for universal use. Simply push on to lance. Connector: M 18 x 1.6. Driven by water stream. Gently removes fine dust and traffic film from any surface.
