Operating instructions

Table Of Contents
- 31
1 Dirt water discharge hose
2 waste water tank
3 Signal transmitter
Switches off the suction turbine when the waste water
tank is filled
4Lock
5 Cover waste water tank
Clean the waste water tank after completion of work.
Before cleaning, empty the waste water tank, see
Chapter "Wet cleaning | Emptying the waste water
tank".
1 Safety support
2 waste water tank
3 Dirt water discharge hose
4 Cleaning flap
Open for cleaning
For thorough cleaning, open the cleaning flap.
Use a water hose to spray out the interior of the waste
water tank.
After cleaning, check the function of the signal genera-
tor.
1 Fresh water tank
2 Fresh water tank cover
3 Filling level display
4 Drainage hose for fresh water
Flush out the fresh water tank with clear water after fin-
ishing work.
Empty residual water through the drain hose.
1 Vacuum bar
2 Suction hose
3 Seal strip
Clean suction bar and suction hose.
Clean the side sealing strips.
Clean the spray nozzles of the side scrubbing deck and
roller brush.
9.8.4 Clean the waste water tank
9.8.5 Clean the fresh water reservoir
1
2
9.8.6 Cleaning sealing lips, suction bar and spray nozzles
1
2
72 EN