Operating instructions

- 26
몇
WARNING
Risk of burns!
 To change the motor oil and motor oil filter, allow the
vehicle to cool down until there is no longer a risk of
burns.
1 Oil filler cap
2 Oil dipstick
3 Engine oil filter
Note
A warm motor facilitates the draining of the motor oil.
 Prepare a collection container for at least 10 litres
(2.7 gallons) of oil.
 Switch off engine.
 Unscrew oil drain plug.
 Remove oil cap.
 Drain off oil.
 Unscrew the oil filter.
 Clean the intake and sealing areas.
 Coat the washer of the new oil filter with oil before fitting
it.
 Fit in the new oil filter and tighten it by hand.
 Screw in the oil drain plug with the new seal.
Tightening torque: ...Nm
 Fill in motor oil.
For oil type and filling quantity refer to Chapter "Techni-
cal specifications".
 Close oil cap.
 Let the motor run for approx. 30 seconds.
 Wait at least 5 minutes.
 Check engine oil level.
 Check for leaks.
 Deliver the old oil to the respective collection centres.
1 Lever for steering wheel adjustment
2 Brake fluid container
3 Filling level
 If necessary, refill DOT brake fluid currently commer-
cially available.
 Have the brake fluid changed by Customer Service in
accordance with the inspection checklist (ICL).
9.5.4 Change the motor oil and the oil filter
neues Bild
9.5.5 Check brake fluid status
27EN