Operating instructions

- 10

DANGER
Risk of injury, risk of damage!
 The vehicle is not approved for crane loading.
 Do not use a forklift to unload/load the appliance.
 The packaging material (plastic bag, thermocol, etc.) is
a potential source of danger and should not reach the
hands of children.
 Carefully unpack the device while refraining from using
any tool that could damage the device. After unpacking,
check whether the device is complete and fully func-
tional. If not, call customer service.
 Note information regarding pushing/towing the device
in a later chapter.
 Mind the vehicle weight during loading!
The freewheel (bypass) of the hydraulic pump must first be
opened before the device can be pushed/towed.
 DANGER
Risk of injury!
 Secure the device against rolling away prior to opening
the freewheel.
Note
The travel drive is inoperable.
Braking effect exists no more.
몇 CAUTION
Risk of damage to the hydrostatic axle drive!
 Do not move the device for long distances without en-
gaging self-propulsion; a speed of 5 km/h should not be
exceeded.
1 Hydraulic pump
2 Screw for freewheeling (bypass)
 Open engine cover.
Open freewheel (bypass)
 Open the screw for the freewheel by at least 1/2 revo-
lution (anti-clockwise).
Close freewheel (bypass)
 After moving/towing the device, turn the screw for the
freewheel back until it stops (clockwise).
1 Towing eye
 To tow the vehicle, attach the towing eye to the device
at the front.
 Read the operating instructions of the engine manufac-
turer before start-up and follow the safety instructions
carefully.
 Park the machine on an even surface.
 Remove ignition key.
 Lock parking brake.
5Start up
5.1 Unpack the device and unload it
Net weight (transport weight) 1750 kg
3850 lbs
5.2 Pushing/towing the device (without engaging self-propulsion)
5.3 General notes
11EN