Operating instructions

1) Start the motor

2) Set the motor speed to Max. (working speed).

3) Release the parking brake.

4) Drive the unit to the operating location.

5) Open the ap of the waste container. The ap of the

waste container must be open during wet cleaning.

6)6) Switch on the water pump.

7) Actuate the lever and switch on the brushes,

the brushes lower to the ground.

8) Actuate the lever and lower the side scrubbing deck.

9) Select the water dosage for the side scrubbing deck

and brushes.

10) Switch on the suction fan switch.

The su The suction bar lowers.

11) Start wet cleaning.

Note

The dirt that is picked up is collected in the waste water

tank and, if necessary, in the waste container.

A detailed description of the cleaning types

is provided in the operating instructions!

Basic cleaning

Basic cleaning consists of 2 work steps and is used for heavily contaminated surfaces

or stubborn dirt deposits.

Maintenance cleaning

Maintenance cleaning is used for daily cleaning.

There are 2 types of wet cleaning.

- Basic cleaning

- Maintenance cleaning

Wet cleaning