Operating instructions

14
4
Care after wet cleaning
- Clean the suction bar and suction hose.
- Clean the side sealing strips.
- Clean the spray nozzles on the side scrubbing deck and roller brush.
1 Suction bar
2 Suction hose
3 Sealing strip
- Flush the fresh water tank with fresh water after nishing work.
- Drain residual water using the drain hose.
1) Fresh water tank
2) Fresh water tank cap
3) Filling level display
4) Fresh water drain hose
1) Waste water drain hose
2) Waste water tank
3) Sensor
Switches off the suction turbine
when the waste water tank is full
4) Lock
5)
5) Waste water tank cap
- Empty the waste water tank before cleaning
- Open the waste water tank cap for cleaning.
- Spray out the interior of the waste water tank
using a water hose.
- Check the function of the sensor after cleaning.
Clean the waste water tank after nishing work
Clean the fresh water tank after nishing work
Clean the suction bar after nishing work