Operating instructions

10
2
Sweeping
Adjust the travel speed to the circumstances in
order to achieve optimum cleaning results.
The waste container must be emptied at regular
intervals during operation.
1) Start the motor
2) Set the motor speed to Max. (working speed).
3) Release the parking brake.
4) Drive the unit to the operating location
5) Open the waste container ap
6) Actuate the lever and switch on the brushes.
7) Lower the side brushes.
8) Switch on the suction fan switch.
9) Start sweeping.
As needed: Dedust the dust lter.
For dedusting, actuate the Filter dedusting switch
4 - 5 times for approx. 5 seconds
(no continuous operation!).
Do not sweep large quantities of water!
Dedust the dust lter daily. Do this several times a day in
heavily contaminated work areas.
CAUTION! Risk of damage!
Never leave the Filter dedusting switch permanently
switched on in continuous operation.
S
Switch off the suction fan before dedusting.
