HD 13/18-4 S Plus Super class cold water pressure washer for continuous operation in tough operating conditions. Like the HD 10/25-4 S Plus model but with higher water flow and lower pressure. 1 2 Save energy and time: EASY!Force high-pressure guns and EASY!Lock quick-release locks. At last – work without getting tired: the EASY!Force high-pressure 3 3 4 For increased safety Integrated electronics for unit monitoring. Automatic switch-off in case of undervoltage or overvoltage. gun.
TECHNICAL DATA AND EQUIPMENT. HD 13/18-4 S Plus Save energy and time: EASY!Force high-pressure guns and EASY!Lock quick-release locks. Water-cooled three-phase motor Outstanding cleaning performance Technical data Order no. 1.286-932.0 EAN code 4054278164977 Current type Ph / V / Hz 3 / 400 / 50 Flow Rate l/h 650 – 1300 Operating pressure bar / MPa 30 – 180 / 3 – 18 Max. Pressure bar / MPa 198 / 19,8 Max.
HD 13/18-4 S PLUS 1.286-932.0 1 2 3 Order no. 4 Flow Rate 5 6 Price 7 Description Trigger guns 1 4.118-005.0 EASY!Force Advanced Conversion kit 1 from high pressure hose 2 4.111-050.0 Conversion kit 2 from device 3 4.111-051.0 Conversion kit 3 only EASY!Force Effortless, not energy-sapping: the EASY!Force high-pressure gun uses the recoil force of the high-pressure jet to reduce the holding force for the operator to zero.
HD 13/18-4 S PLUS 1.286-932.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Order no. Max. working pressure Length Price Description Rotating spray lances 1 4.112-000.0 Spray lance 300 bar 1050 mm 2 2.680-002.0 LED nozzle light Spray lance Spray lance extender 3 4.112-027.0 300 bar 4 4.112-024.0 300 bar 5 4.112-007.0 300 bar 6 4.112-006.0 300 bar 7 4.112-018.0 300 bar 8 4.112-021.0 300 bar 9 4.112-048.0 300 bar 1000 mm 10 2.112-016.
HD 13/18-4 S PLUS 1.286-932.0 17 Order no. Max. working pressure Length Price Description Additional handle Additional handle for EASY!Lock spray lances Comfortable in every situation – the additional handle is easy to attach to the spray lance of our new EASY!Lock generation and makes work easier by allowing you to adjust your posture to suit the particular task. Available accessories. HD 13/18-4 S Plus, 1.286-932.0, 2022-01-19 Included in delivery. 17 4.321-380.
HD 13/18-4 S PLUS 1.286-932.0 1 2 Order no. Max. working pressure Nozzle size Price Description Dirt blaster, large Dirt Blaster Nozzle 1 4.114-030.0 300 bar 70 The dirt blaster with rotating pencil jet offers 10 times better cleaning performance. Ceramic nozzle and bearing ring for a long service life. Further data: Max. 300 bar, 30 MPa, 85°C. Angle vario nozzle 0°-90° Included in delivery. 2 4.113-006.0 80 Variable angle nozzle for spray angle adjustment from 0° to 90°.
HD 13/18-4 S PLUS 1.286-932.0 1–4 Order no. Nozzle size Price Description Power nozzle spray angle 25° Power Nozzle 1 2.113-015.0 80 Fan jet nozzle for large-area coverage and stubborn dirt and stains. 2 2.113-038.0 80 High-pressure nozzle with powerful jet for extremely stubborn dirt. 3 2.113-051.0 80 Fan jet nozzle with 15° spray angle suitable for stubborn dirt. 4 2.113-057.0 80 Power nozzle with a 40° spray angle and fan jet, suitable for large areas and sensitive surfaces.
HD 13/18-4 S PLUS 1.286-932.0 1–2 3, 7, 9 4 5–6, 8 13 14 15 16 10 11 12 ID Max. working pressure Length 1 6.110-031.0 DN 8 315 bar 2 6.110-032.0 DN 8 3 6.110-042.0 DN 10 4 6.110-043.0 DN 10 220 bar 20 m 5 6.110-044.0 DN 10 220 bar 25 m 6 6.110-045.0 DN 10 220 bar 40 m 7 6.110-059.0 DN 12 210 bar 15 m 8 6.110-060.0 DN 12 210 bar 40 m 9 6.110-041.0 DN 10 220 bar 10 m 10 6.110-024.0 DN 8 400 bar 1,5 m 11 6.110-069.0 DN 8 400 bar 1,5 m 12 6.110-038.
HD 13/18-4 S PLUS 1.286-932.0 1 2 3 4 5 6–7 8 9 10 11 12 13 14 15 Order no. Price Description Nozzle union 1 4.112-011.0 Nozzle screws with protectors for high-pressure and power nozzles Stainless steel injector kit for HDS 12/18-4S 2 6.645-763.0 Dosing valve for stainless steel injector 3 6.500-000.
HD 13/18-4 S PLUS 1.286-932.0 21 Order no. Coupler -2xM22x1,5 20 4.111-037.0 ADAPTER for replacement TR22IGM22AG Er 21 4.111-046.0 Included in delivery. Price Description Brass double connector for connecting and extending highpressure hoses. With rubber protection. Connector: 2x M 22 x 1.5 m. Rotatable adapter for connecting EASY!Force high-pressure gun and high-pressure hoses with M 22x1.5 connection Available accessories. HD 13/18-4 S Plus, 1.286-932.
HD 13/18-4 S PLUS 1.286-932.0 1–3 4–5 6–7 8 9–10 13 14 17–18 19 20 Order no. Max. working pressure Nozzle size Diameter 11 Price 12 Description Pipe cleaning hose, ID 6 Hose assembly TR pipe cleaning DN6 max.2 1 6.110-046.0 250 bar Pipe cleaning hose, DN 6, 20 m, 220 bar Hose assembly TR pipe cleaning DN6 max.2 2 6.110-008.0 250 bar 3 6.110-047.
HD 13/18-4 S PLUS 1.286-932.0 2, 10 3 4 9 11 12 Order no. 5 Flow Rate Nozzle size 6 Diameter 7 Price 8 Description Hard Surface Cleaner FRV 30 1 2.642-910.0 Extension hose 5 m 2 4.440-939.0 For smooth floors indoors. The squeegee increases the suction performance of the FRV 30 and minimises the amount of water remaining. This means the floor is dry in just a few minutes. 5m extension hose for FRV 30. Connection sleeve included. Add-on kit hose attachment 3 2.642-528.
HD 13/18-4 S PLUS 1.286-932.0 1 2 3 8 9 10 Order no. 4 Flow Rate 5 6 Price 7 Description Cup foam lance 1 4.112-055.0 Cup foam lance Basic 3 900 – 2500 l/h For high-pressure cleaners with a flow rate of 900–2500 l/h: new, robust and very high-quality foam cup lance with outstanding foam quality while consuming half as much cleaning agent. Bottle cleaning agents 1L 2 5.071-414.0 Cup foam lance Advanced 042 3 2.112-018.0 Tank grey only for replacement 1L 4 6.414-050.
HD 13/18-4 S PLUS 1.286-932.0 1 3 4 9 10–11 Order no. 5 Length 6 7 Price 8 Description Hose reel add-on kit 1 2.110-008.0 20 m Wall-mounted hose reel 2 2.639-257.0 15 m Add-on kit hose reel plastics 3 6.392-074.0 20 m 4 6.392-083.0 20 m 5 6.392-106.0 20 m 6 6.392-105.0 20 m 7 6.392-076.0 20 m 8 6.392-122.0 20 m Hose reel kit for HD super class ABS hose reel for mounting on the machine. For safe and tidy stowage of high-pressure hoses.
HD 13/18-4 S PLUS 1.286-932.0 1 2–3 4–5 Order no. 7 Flow Rate Water feed temperature Length Length Price Description Telescopic Telescopic lance TL 7 F Telescopic lance TL 7 H Telescopic lance TL 10 H Telescopic lance TL 10 C Telescopic lance TL 14 C TL high pressure adapter Included in delivery. 1 4.580-097.0 max. 40 °C 2 4.762-609.0 max. 60 °C 3 4.762-610.0 max. 60 °C 4 4.762-611.0 max. 60 °C 5 4.762-612.0 max. 60 °C 6 4.762-613.0 max. 60 °C 7 4.775-154.0 max.
HD 13/18-4 S PLUS 1.286-932.0 1–3 Order no. Flow Rate Water feed temperature Length Length Price Description Hoses Included in delivery. 1 6.392-978.0 max. 155 °C 2 6.392-977.0 max. 155 °C 3 6.392-976.0 max. 155 °C High-quality, flexible HP hose (with rubber covering) for the iSolar TL 7. The outer layer has especially good sliding properties when extending and retracting the telescopic rod. High-quality, flexible HP hose (with rubber covering) for the iSolar TL 10.
HD 13/18-4 S PLUS 1.286-932.0 1 2 Order no. Nozzle size Price Description Nozzle pack for wet blasting attachment Nozzle pack TR wet jet set 0080 1 2.112-029.0 80 Consisting of wet jet nozzle and nozzle insert – only for use in combination with wet jet unit 4.115-000.0 | 4.115-006.0. 2 6.415-083.0 8 mm In addition to nozzle packs. Very wear-resistant nozzle with boron carbide chuck for continuous-duty operation.
HD 13/18-4 S PLUS 1.286-932.0 1 Order no. Price Description Crane lifting kit Crane loading kit for HD super class Effortless loading by crane. Available accessories. HD 13/18-4 S Plus, 1.286-932.0, 2022-01-19 Included in delivery. 1 2.640-438.
HD 13/18-4 S PLUS 1.286-932.0 1 2 3 10 11 12 Order no. 4 6 7 Price 8–9 Description Geka coupling With hose nozzle, R 1" 1 6.388-465.0 with hose barb Hose coupling 2 6.388-458.0 with female thread Water filter 3 6.414-956.0 Suction filter with check valve 4 4.730-012.
HD 13/18-4 S PLUS 1.286-932.0 1 2 3 Order no. Flow Rate Price Description Push-on washing brush Push-on wash brush, M 18 x 1.5 1 4.113-001.0 Push-on wash brush for universal use. Simply push on to lance. Connector: M 18 x 1.6. Driven by water stream. Gently removes fine dust and traffic film from any surface. Temperature resistant up to 60°C, M 18 x 1.5 (replaceable brush insert).
