Operating instructions
Table Of Contents
- English
- Contents
- Environmental protection
- Danger or hazard levels
- Proper use
- Device elements
- Start up
- Operation
- Transport
- Storage
- Care and maintenance
- Troubleshooting
- Suction turbine does not run
- Suction turbine turns off
- Suction turbine does not start again after the container has been emptied
- Suction capacity decreases
- Dust comes out while vacuuming
- Automatic shut-off (wet vacuum cleaning) does not react
- Automatic filter cleaning is not working
- Automatic filter cleaning cannot be switched off
- Automatic filter cleaning cannot be switched on
- Customer Service
- Warranty
- Accessories and Spare Parts
- Technical specifications
- Français
- Table des matières
- Protection de l’environnement
- Niveaux de danger
- Utilisation conforme
- Éléments de l'appareil
- Mise en service
- Utilisation
- Transport
- Entreposage
- Entretien et maintenance
- Assistance en cas de panne
- La turbine d'aspiration ne fonctionne pas
- Turbine d'aspiration se met hors marche
- Turbine d'aspiration ne se remet pas en marche après avoir vidé la cuve
- La force d'aspiration diminue
- De la poussière s'échappe lors de l'aspiration
- Dispositif automatique de coupure (aspiration humide) ne se déclenche pas
- Le nettoyage automatique de filtre ne fonctionne pas
- Le nettoyage automatique ne se laisse pas mettre hors service
- Le nettoyage automatique ne se laisse pas mettre en service
- Service après-vente
- Garantie
- Accessoires et pièces de rechange
- Caractéristiques techniques
- Español
- Índice de contenidos
- Protección del medio ambiente
- Niveles de peligro
- Uso previsto
- Elementos del aparato
- Puesta en marcha
- Manejo
- Transporte
- Almacenamiento
- Cuidados y mantenimiento
- Ayuda en caso de avería
- La turbina de aspiración no funciona
- La turbina de aspiración se desconecta
- La turbina de aspiración no funciona tras vaciar el recipiente
- La capacidad de aspiración disminuye
- Pérdida de polvo durante la aspiración
- El sistema automático de desconexión (aspiración en húmedo) no arranca
- La limpieza automática de filtro no funciona
- La limpieza automática de filtro no se puede apagar
- La limpieza automática de filtro no se puede encender
- Servicio de atención al cliente
- Garantía
- Accesorios y piezas de repuesto
- Datos técnicos
– 2
1 Electrodes
2 Suction support
3 Suction hose
4 Hose hook
5 Push handle lock (NT 50/1 only)
6 Crevice nozzle
7 Air outlet, working air
8 Suction head
9 Suction head lock
10 Recessed grip
11 Dirt receptacle
12 Steering roller
13 Handle
14 Air inlet, motor cooling air
15 Floor nozzle
16 Suction tube
17 Stop for tool box
18 Rubber sleeve, screwable
19 Fixing eyelet
20 Filter cover
21 Carrying handle
22 Suction force regulator (continuous)
23 Tool adapter (Tact Te only)
24 Push handle (NT 50/1 only)
25 Rotary switch for suction output (min-
max) (Tact Te only)
26 Rotating knob
27 Socket (Tact Te only)
28 Floor nozzle holder
29 Drain hose (NT 50/1 only)
30 Holder for suction pipe
31 Cable hook (NT 50/1 only)
32 Bender
33 Power cord
34 Bender holder (NT 30/1, NT 40/1 only)
35 Filter frame
36 Flat fold filter (PES)
37 Filter dedusting
38 Nameplate
ATTENTION
The flat pleated filter must always be in
place while vacuuming.
Static charge is deflected by providing
earthing to the connection nozzles. This
prevents the formation of sparks and cur-
rent shocks due to attachments (option)
with electrical conductivity.
– When vacuuming fine dust, a fleece fil-
ter or dust bag can also be used.
Illustration
Release and remove the suction head.
Insert the fleece filter bag.
Insert and lock the suction head.
Illustration
Release and remove the suction head.
Insert the disposal bag.
Pull disposal bag over the container.
Make sure that the marking line is situ-
ated within the container and both ven-
tilation holes are positioned at the back
of the container.
Insert and lock the suction head.
Illustration
Remove the brush strips.
Install the rubber lips.
Illustration
Release and remove the suction head.
Pull out the fleece filter bag on the
flange towards the top.
Tightly close the fleece filter bag with
lock cap.
Insert and lock the suction head.
– To suck wet dirt, first remove the fleece
filter bag.
Device elements
Start up
Anti-static system
Dry vacuum cleaning
Install fleece filter bag
Installing the dust disposal bag
Wet vacuum cleaning
Inserting the rubber lips
Remove the fleece filter bag
10 EN