Operating instructions

16 English
Faults without display on the console
Fault Remedy
Appliance cannot be start-
ed
Press control switch.
Check battery; replace, if needed.
Check if the mains plug is connected.
Insufficient water quantity Check fresh water level, refill tank if necessary.
Check hoses for blockages; clean if required.
Insufficient vacuum perfor-
mance
Clean the seals between dirt water reservoir and
cover and check for tightness, replace if required.
Clean the fluff filter.
Clean the vacuum lips on the vacuum bar, turn or
replace if required
Check if the suction hose and vacuum bar are
chocked, clean if required
Check the suction hose for tightness; replace if re-
quired.
Check if the cover on the dirt water discharge hose
is closed
Check the setting of the vacuum bar.
Insufficient cleaning result Check the brushes for wear, replace if required.
Brushes do not turn Press control switch.
Check if foreign matters block the brushes; remove
foreign matter if required.