Product information

ManualsBrandsKärcher ManualsProfessionalHDS 8/17-4M

HDS 8/17 -4M

Our new medium and super class hot water high-pressure cleaners not only do a rst-class job

of cleaning, they are also extremely rugged and simple to operate. The new ECO mode, unique

to KÄRCHER, makes them truly unbeatable. When the machine is set to this mode it operates

automatically in the most economical temperature range. This not only saves running costs, it

is also good for the environment.

Efciency



In eco!efciency mode, the machine operates at the most efcient-

temperature range (60 °C) – even at the maximum water ow.



The burner cycles are optimised to reduce fuel consumption by 20

percent compared to full load operation.

Operational safety



The large, integrated water ne lter provides reliable protection

against small dirt particles for the high-pressure pump.



The built-in exhaust gas thermostat deactivates the drive motor

when the emission temperature exceeds 300°C.

Storage



Storage hooks for power cord and high-pressure hose.

Mobility concept



Jogger principle with large rubber tyre wheels and steering roller.



Sturdy transport eyelets ensure safe transport.

HDS 8/17 -4M, 1.077-608.0, 2019-06-19

Summary of content (14 pages)

PAGE 1
HDS 8/17 -4M Our new medium and super class hot water high-pressure cleaners not only do a first-class job of cleaning, they are also extremely rugged and simple to operate. The new ECO mode, unique to KÄRCHER, makes them truly unbeatable. When the machine is set to this mode it operates automatically in the most economical temperature range. This not only saves running costs, it is also good for the environment.
PAGE 2
TECHNICAL DATA AND EQUIPMENT. HDS 8/17 -4M  Economical eco!efficiency mode  Axial pump with turbo blower  Three-phase motor: air-cooled Technical data Order no. 1.077-608.0 EAN code 4039784834637 Current type Ph / V / Hz 3 / 420 / 50 Flow rate l/h 400–800 Pressure bar / MPa 30–170 / 3–17 Max. temperature °C 80 / 155 Connected load kW 5.5 Heating oil consumption, full load kg/h 5.
PAGE 3
HDS 8/17 -4M 1.077-608.0 1 2, 5 3 4 9 10 11 12 6 7 8 ID Max. working pressure Length High-pressure hose, 10 m, ID 8, 1 6.391-342.0 315 bar, extension piece High-pressure hose, 30 m, ID 8, 2 6.390-293.0 including rotary coupling Longlife 400 with unions on both sides ID 8 315 bar 10 m  ID 8 315 bar 30 m  3 6.391-354.0 ID 8 400 bar 10 m 4 6.389-709.0 ID 8 400 bar 15 m 5 6.390-294.0 ID 8 6 6.390-178.0 ID 8 400 bar 1.5 m 1.5 m high-pressure hose (DN 8, M 22 x 1.
PAGE 4
HDS 8/17 -4M 1.077-608.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Order no. Max. working pressure Length Price Description Rotating spray lances 1050 mm spray pipe, rotatable 600 mm spray pipe, rotatable 850 mm spray pipe, rotatable 1550 mm spray pipe, rotatable 2050 mm spray pipe, rotatable 1 4.760-660.0 300 bar 2 4.760-664.0 300 bar 3 4.760-663.0 300 bar 4 4.760-661.0 300 bar 5 4.760-662.
PAGE 5
HDS 8/17 -4M 1.077-608.0 1 2 3 Order no. Flow rate Price Description Trigger guns 1 4.775-823.0  Quick coupling 2 6.401-458.0 Male coupling 3 6.401-459.0 For quick change of different spray lances and accessories. Optimum adaption to Kärcher accessories, especially for  connection between trigger gun and spray lance.With M22 x 1,5 female. Hardened stainless steel nipple for quick coupling 6.401 458.With M22 x 1,5 male. High-end HP trigger gun Quick connect   HDS 8/17 -4M, 1.077-608.
PAGE 6
HDS 8/17 -4M 1.077-608.0 1 Order no. Nozzle size Price Description Power nozzle spray angle 25° 25° power nozzle for applying cleaning agent  250   HDS 8/17 -4M, 1.077-608.0, 2019-06-19  1 2.884-521.
PAGE 7
HDS 8/17 -4M 1.077-608.0 1 2 3 Order no. 4–5 Max. working pressure Nozzle size 6 Diameter 7–9 Price Description Pipe cleaning nozzle Dirt blaster pipe cleaning D21/060 1 4.765-002.0 60 21 mm Dirt blaster pipe cleaning D30/060 2 4.765-005.0 60 30 mm Pipe cleaning nozzle 080 3 5.763-087.0 80 24 mm Pipe cleaning nozzle 4 5.763-015.0 55 16 mm 5 5.763-016.0 60 16 mm 6 5.763-017.0 50 30 mm 7 6.415-945.0 60 25 mm 8 6.415-947.0 60 30 mm 9 6.415-949.
PAGE 8
HDS 8/17 -4M 1.077-608.0 1 3 4 Order no. 5 Flow rate Nozzle size 6 Diameter Price Description Hard Surface Cleaner FRV 30 FRV 30 surface cleaner 1 2.642-999.0 Rubber lip for FRV 30 2 2.642-910.0  For smooth floors indoors. The squeegee increases the suction performance of the FRV 30 and minimises the amount of water remaining. This means the floor is dry in just a few minutes.  Machine-specific nozzle kits for FRV Nozzle kit 050 – for FRV 30 3 2.642-433.
PAGE 9
HDS 8/17 -4M 1.077-608.0 1 Order no. Flow rate Price Description Cup foam lance Cup foam lance 1 6.394-668.0 1-litre cleaning agent container for foam lance 2 6.414-954.0  Short, handy foam lance with adjustable spray angle with 1 litre detergent tank. Ideal for cleaning cars due to its com pact design.   HDS 8/17 -4M, 1.077-608.
PAGE 10
HDS 8/17 -4M 1.077-608.0 1 2 3 4 8 9 10 11–12 Order no. 5 6 Price 7 Description Rotary coupling 1 4.401-091.0 Kärcher rotary coupling prevents twisting and kinking of high-pressure hoses for ease of use. Connector M 22 x 1.5 m. With grip protection. 2 4.424-004.0 M22 x 1,5female and swivel connection.For extension of high-pressure hoses with AVS connection or for usage of the  telescopic lance with a high-pressure hose with AVS connection. Adapter 1 M22AG-TR22AG 3 4.111-029.
PAGE 11
HDS 8/17 -4M 1.077-608.0 1 2 3 Order no. 4 Length 5 6 Price Description Automatic, self-winding hose reels ABS pivoting stainless steel wall bracket 1 2.641-867.0 Automatic hose reel, powdercoated steel / plastic 2 6.392-975.0 20 m Automatic stainless steel / synthetic material hose drum 3 6.392-965.0 20 m ABS automatic stainless steel hose drum 4 2.641-866.0 20 m Swivelling wall bracket made of high-grade steel (for 2.641866).
PAGE 12
HDS 8/17 -4M 1.077-608.0 1 2–3 4 Order no. 5–7 Flow rate Feed temperature Length Length Price Description Solar cleaning – telescopic lances iSolar TL 7 H (without hose) 1 4.107-054.0 max. 60 °C iSolar TL 10 H (without hose) 2 4.107-053.0 max. 60 °C iSolar TL 10 C (without hose) 3 4.107-055.0 max. 60 °C iSolar TL 14 C (without hose) 4 4.107-052.0 max. 60 °C 5 6.392-978.0 max. 155 °C 6 6.392-977.0 max. 155 °C 7 6.392-976.0 max.
PAGE 13
HDS 8/17 -4M 1.077-608.0 1 2 3 Order no. 4 Price Description Crane lifting kit Crane loading attachment kit for HDS medium and super class NOCH NICHT GEPFLEGT ---------------- > Y distributor 1 2.642-424.0 2 2.644-053.0  Y distributor 3 4.405-048.0  Effortless loading by crane.  Accumulator kits Add-on accumulator for HDS M/S  The accumulator can be mounted on the HDS machine in order to dampen pressure surges, which conserves the machine's line system.   HDS 8/17 -4M, 1.077-608.
PAGE 14
HDS 8/17 -4M 1.077-608.0 1 2 Order no. Length Diameter Price Description Geka coupling Geka connector with hose barb, R 1" Suction filter 1 6.388-465.0  Water suction filter 2 6.414-956.0    HDS 8/17 -4M, 1.077-608.