Product information

ManualsBrandsKärcher ManualsHot water high-pressure cleanersHDS 10/20-4 M

HDS 10/20-4 M

Our new medium and super class hot water pressure washers do a rst-class job of cleaning

as well as also being extremely rugged and simple to operate.

1 2 3 4

Efciency



In the Eco setting the unit operates in the most economical tempera-

ture range (60°C) with full water ow.



Burner cycles are optimised to reduce fuel consumption by up to 20%

compared to full-load operation.

Maximum efciency



Highly efcient burner technology.



4-pole electric motor with 3 piston axial pump.

Maximum efciency



Highly efcient burner technology.



4-pole electric motor with 3 piston axial pump.

Operational reliability



The large, integrated ne-mesh water lter reliably protects the

high-pressure pump against dirt particles.



An integrated exhaust gas thermostat switches off the drive motor if

the exhaust gas temperature exceeds 300°C.

HDS 10/20-4 M, 1.071-900.0, 2022-01-19

Summary of content (21 pages)

PAGE 1
HDS 10/20-4 M Our new medium and super class hot water pressure washers do a first-class job of cleaning as well as also being extremely rugged and simple to operate. 1  2 Efficiency In the Eco setting the unit operates in the most economical temperature range (60°C) with full water flow.  3 3   4 Maximum efficiency Highly efficient burner technology. 4-pole electric motor with 3 piston axial pump.
PAGE 2
TECHNICAL DATA AND EQUIPMENT. HDS 10/20-4 M  Economical eco!efficiency mode  Two detergent tanks  Three-phase motor: water-cooled Technical data Order no. 1.071-900.
PAGE 3
HDS 10/20-4 M 1.071-900.0 1 2 3 Order no. 4 Flow Rate 5 6 Price 7 Description Trigger guns 1 4.118-005.0 EASY!Force Advanced Conversion kit 1 from high pressure hose 2 4.111-050.0 Conversion kit 2 from device 3 4.111-051.0 Conversion kit 3 only EASY!Force Effortless, not energy-sapping: the EASY!Force high-pressure gun uses the recoil force of the high-pressure jet to reduce the holding force for the operator to zero.
PAGE 4
HDS 10/20-4 M 1.071-900.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Order no. Max. working pressure Length Price Description Rotating spray lances 1 4.112-000.0 Spray lance 300 bar 1050 mm 2 2.680-002.0 LED nozzle light Spray lance Spray lance extender 3 4.112-027.0 300 bar 4 4.112-024.0 300 bar 5 4.112-007.0 300 bar 6 4.112-006.0 300 bar 7 4.112-018.0 300 bar 8 4.112-021.0 300 bar 9 4.112-048.0 300 bar 1000 mm 10 2.112-016.
PAGE 5
HDS 10/20-4 M 1.071-900.0 17 Order no. Max. working pressure Length Price Description Additional handle Additional handle for EASY!Lock spray lances Comfortable in every situation – the additional handle is easy to attach to the spray lance of our new EASY!Lock  generation and makes work easier by allowing you to adjust your posture to suit the particular task.  Available accessories. HDS 10/20-4 M, 1.071-900.0, 2022-01-19  Included in delivery. 17 4.321-380.
PAGE 6
HDS 10/20-4 M 1.071-900.0 1–4 Order no. Nozzle size Price Description Power nozzle spray angle 25° Power Nozzle 1 2.113-024.0 52 Fan jet nozzle with 25° spray angle, suitable for large areas  and removing stubborn dirt and stains. 2 2.113-035.0 55 High-pressure nozzle with powerful jet for extremely stubborn dirt.  3 2.113-047.0 55 Fan jet nozzle with 15° spray angle suitable for stubborn dirt.  4 2.113-055.
PAGE 7
HDS 10/20-4 M 1.071-900.0 1 2 3–5 17 18 19 6–9 10, 14, 16 11 12–13, 15 ID Max. working pressure Length 1 6.110-038.0 DN 8 400 bar 10 m 2 6.110-024.0 DN 8 400 bar 1,5 m 3 6.110-023.0 DN 8 400 bar 30 m Durable, 10 m long high-pressure hose (ID 8) with double steel reinforcement and EASY!Lock hand screw connection  at both ends and ANTI!Twist. Approved for 400 bar pressure. 1.5 m high-pressure hose (DN 8, M 22 x 1.5) with kink protection and connectors at both ends.
PAGE 8
HDS 10/20-4 M 1.071-900.0 1 2 3 Order no. 4 Price Description Weed control WR 20 WR 100 WR 10  Included in delivery. 1 2.114-013.0 2 2.114-014.0 3 2.114-015.0 4 2.114-016.0 In combination with a hot water high-pressure cleaner from Kärcher, the 50 cm wide weed remover WR 50 is ideal for removing weeds. It comes with an adaptive chassis and nozzle adapter. For thorough weed removal: The WR 20 weed remover for use with a hot water high-pressure cleaner from Kärcher.
PAGE 9
HDS 10/20-4 M 1.071-900.0 1 2 Order no. Max. working pressure Nozzle size Price Description Dirt blaster, large Dirt Blaster Nozzle 1 4.114-036.0 300 bar 55 The dirt blaster with rotating pencil jet offers 10 times better cleaning performance. Ceramic nozzle and bearing ring for a long service life. Further data: Max. 300 bar, 30 MPa, 85°C.  Angle vario nozzle 0°-90°  Included in delivery. 2 4.113-008.0 55 Variable angle nozzle for spray angle adjustment from 0° to  90°.
PAGE 10
HDS 10/20-4 M 1.071-900.0 1 2 3 4 5 6 7–8 9 10 11 12 13 14 15 Order no. Price Description Nozzle union 1 4.112-011.0 Nozzle screws with protectors for high-pressure and power  nozzles Stainless steel injector kit for HDS 10/20-4M 2 6.645-762.0 Dosing valve for stainless steel injector 3 6.500-000.0 Developed for the HD 10/20-4 M High-pressure cleaner, the stainless steel injector ensures optimal cleaning agent dosa-  ge. Supplied with suction hose and filter.
PAGE 11
HDS 10/20-4 M 1.071-900.0 21 22 Order no. Adapter 8 TR20IG-M18AG 20 4.111-036.0 Coupler -2xM22x1,5 21 4.111-037.0 ADAPTER for replacement TR22IGM22AG Er Flue pipe 22 4.111-046.0 Flue gas adapter 23 4.656-149.0 24 4.656-080.0  Included in delivery. 23–24 Price Description Adapter 8 to connect the new spray lance with the old  nozzle Brass double connector for connecting and extending highpressure hoses. With rubber protection. Connector: 2x M 22  x 1.5 m.
PAGE 12
HDS 10/20-4 M 1.071-900.0 1–3 4 5 6 7–8 11 12 15–16 17 18 Order no. Max. working pressure Nozzle size Diameter 9 Price 10 Description Pipe cleaning hose, ID 6 Hose assembly TR pipe cleaning DN6 max.2 1 6.110-046.0 250 bar Pipe cleaning hose, DN 6, 20 m, 220 bar Hose assembly TR pipe cleaning DN6 max.2 2 6.110-008.0 250 bar 3 6.110-047.0 250 bar The 10 m pipe cleaning hose is a highly flexible high pressure hose for pipe interior cleaning (threaded connection for  nozzle R 1/8).
PAGE 13
HDS 10/20-4 M 1.071-900.0 1 2 8 9 3 Order no. 4 Flow Rate Nozzle size 5 Diameter 6 Price 7 Description Hard Surface Cleaner FRV 30 Add-on kit hose attachment 1 2.642-528.0 Suction cup for fixing the suction hose to smooth surfaces.  Add-on kit dirt trap 2 2.642-532.0 Galvanised steel bucket for collecting coarse dirt and for fixing the suction hose in outside areas.
PAGE 14
HDS 10/20-4 M 1.071-900.0 1 2 3 4 5 8 9 10 11 12 Order no. Flow Rate 6 Price 7 Description Cup foam lance 1 4.112-055.0 Cup foam lance Basic 3 900 – 2500 l/h For high-pressure cleaners with a flow rate of 900–2500 l/h: new, robust and very high-quality foam cup lance with outstanding foam quality while consuming half as much cleaning agent.   Bottle cleaning agents 1L 2 5.071-414.0 Cup foam lance Advanced 025 3 2.112-017.0 Tank grey only for replacement 1L 4 6.414-050.
PAGE 15
HDS 10/20-4 M 1.071-900.0 2 3 4 9–10 11 12 Order no. 5 Length 6 7 Price 8 Description Automatic, self-winding hose reels Wall-mounted hose reel 1 2.639-257.0 15 m Add-on kit hose reel plastics 2 6.392-074.0 20 m 3 6.392-083.0 20 m 4 6.392-106.0 20 m 5 6.392-105.0 20 m 6 6.392-076.0 20 m 7 6.392-122.
PAGE 16
HDS 10/20-4 M 1.071-900.0 1 2–3 4–5 Order no. 7 Flow Rate Water feed temperature Length Length Price Description Telescopic Telescopic lance TL 7 F Telescopic lance TL 7 H Telescopic lance TL 10 H Telescopic lance TL 10 C Telescopic lance TL 14 C TL high pressure adapter  Included in delivery. 1 4.580-097.0 max. 40 °C 2 4.762-609.0 max. 60 °C 3 4.762-610.0 max. 60 °C 4 4.762-611.0 max. 60 °C 5 4.762-612.0 max. 60 °C 6 4.762-613.0 max. 60 °C 7 4.775-154.0 max.
PAGE 17
HDS 10/20-4 M 1.071-900.0 1–3 Order no. Flow Rate Water feed temperature Length Length Price Description Hoses  Included in delivery. 1 6.392-978.0 max. 155 °C 2 6.392-977.0 max. 155 °C 3 6.392-976.0 max. 155 °C High-quality, flexible HP hose (with rubber covering) for the iSolar TL 7. The outer layer has especially good sliding  properties when extending and retracting the telescopic rod. High-quality, flexible HP hose (with rubber covering) for the iSolar TL 10.
PAGE 18
HDS 10/20-4 M 1.071-900.0 1–2 3 4 Order no. Nozzle size Price Description Wet blasting attachment (without nozzle) Wet blasting attachment with flow control (without nozzles) 1 4.115-000.0 Wet blasting attachment without flow control (nozzles not included) 2 4.115-006.0 Paint, rust and scale removal made easy: Kärcher wet blasting attachment with flow control for adding blasting abrasi-  ve to the high-pressure jet.
PAGE 19
HDS 10/20-4 M 1.071-900.0 1 2 3 Order no. 4 5 6 Price Description Crane lifting kit Crane loading kit for HDS middle and super class Transport eyelet attachment kit 1 2.642-424.0 Effortless loading by crane. 2 2.644-053.0 Robust transport eyelet attachment kit for the secure fixing of HDS Medium and Super Class pressure washers during  transport. 3 2.641-796.0 More safety thanks to ABS HDS M/S flame monitoring system: A light sensor monitors the burner flame.
PAGE 20
HDS 10/20-4 M 1.071-900.0 1–2 3 4 11 12 Order no. 5 7 8 Price 9–10 Description Geka coupling    With hose nozzle, R 3/4" 1 6.388-455.0 with hose liner With hose nozzle, R 1" 2 6.388-465.0 with hose barb Hose coupling 3 6.388-458.0 with female thread Water filter 4 6.414-956.0 Suction filter with check valve 5 4.730-012.
PAGE 21
HDS 10/20-4 M 1.071-900.0 1 2 3 Order no. Flow Rate Price Description Push-on washing brush Push-on wash brush, M 18 x 1.5 1 4.113-001.0 Push-on wash brush for universal use. Simply push on to lance. Connector: M 18 x 1.6.  Driven by water stream. Gently removes fine dust and traffic film from any surface. Temperature resistant up to 60°C, M 18 x 1.5 (replaceable brush insert).