Operating instructions
Table Of Contents
- Contents
- About this operating instructions manual
- Environmental protection
- Safety instructions
- Operation
- Open the system
- Settings
- Main switch
- Adjust compressor
- Setting dosing pumps
- Dry foam station
- Wheel cleaner/intensive foam (option)
- Micro emulsion (option)
- Blending device (option)
- Controls
- SB MB standard
- SB MB comfort
- Normal operation
- Open the menu "customer settings"
- Select the parameter you want to set
- Set the parameter with a variable
- Setting a parameter with several variables
- Exiting the menu
- Operating times
- Lighting time
- Fixed holidays
- Non-fixed holidays
- Date / Time
- Coin value
- Programme run times
- System settings
- Setting the dosing pumps
- System
- Hot blowers
- Washing station heater
- Frost protection with lost water
- Emergency frost protection
- External thermostat
- Filling in detergents
- Manual interventions
- Sales indicator
- Frost protection
- Shutting down
- Shutdown
- Function
- Flowchart system with wet foam
- Flowchart system with dry foam
- Attachment kit disconnection from mains (optional)
- Wheel cleaner/intensive foam (option)
- Micro emulsion (option)
- Frost protection 1-tool (option, SB- MB 2 pump Fp only)
- Frost protection 2-tool, wet foam (option, SB-MB 2 pump Fp only)
- 4. Type of water
- Internal frost protection (optional)
- External frost protection (optional)
- Washing place heating (option)
- Monitoring and safety devices
- Overflow valve of high-pressure pump
- Safety valve
- Thermostat mixing valve
- Flame monitoring
- Exhaust thermostat
- Temperature controller
- Temperature controller
- Flow monitor
- Water shortage safeguard
- Motor protection switch
- Hard water sensor
- Pressure switch for RO water shortage
- Level switch Buffer tank is full
- Level sensor pump RO on
- Level switch Buffer tank is empty
- Temperature limiter 4. type of water / warm (option)
- Technical specifications
- Maintenance and care
- Troubleshooting
- Who may remedy faults?
- Fault indication
- Faults shown in the display
- Acknowledge the faults
- Viewing the list of faults
- Viewing the event list
- Interruptions in warm water circulation
- Malfunctions of the washing station heater
- Burner malfunctions with oil-heated devices
- Burner malfunctions with gas-heated devices
- Malfunctions at coin mechanism
- Faults on high pressure pumps
- Disturbed detergent supply
- Malfunctions on the wheel cleaner/intensive foam
- Faults in the compressor
- Faults at the dry foam production (option)
- Interruptions in water preparation
- Faults on the frost protection units)
- Accessories
- Warranty
- Transport
- Storage
- Installing the unit (only for experts)
- Preparing the installation place
- Unpack the equipment
- Aligning the unit and installing it
- Assemble the installation parts
- Water connection
- Electrical connection
- Fuel pipe to the external fuel tank
- Connect the washing station heater and start it up
- Check oil level
- Filling in detergents
- Initial startup
- Turning the base exchanger on
- Start-up of the RO plant
- Check the pressure of rim cleaner (option)
- Check the function of the system
- Starting up the gas burner (option)
- Dimension drawing for CAB model
- Dimension drawing for SKID model
- Dimension drawing for SKID model with WSO upgrade kit
- EU Declaration of Conformity
- Log of high pressure testing
- 3
Foam Wash
Deep cleaning with active foam.
Only use foam brush when the programme
is running and after the high-pressure
wash.
Rinse
Rinse off shampoo and foam.
Distance of high pressure nozzle approx 50 cm.
Hot wax
Warm water with paint protection.
Use after rinsing.
Distance of high pressure nozzle approx 80 cm.
Top care
For Spot-free drying.
Demineralised water leaves a spot-free
high gloss finish.
Distance of high pressure nozzle approx 80 cm.
Dirt Loosening
Removes persistent dirt.
Warm water with special detergent.
Distance of high pressure nozzle approx 30 cm.
Micro emulsion, model A
Removes persistent dirt.
Warm water with special detergent.
Distance of high pressure nozzle approx 30 cm.
Micro emulsion, model B, with external
high pressure pump
Removing bitumen road coating residue.
Spraying a special detergent.
Insects Loosening
Loosens insects.
Warm water with special insect removing
detergent.
Distance of high pressure nozzle approx 30 cm.
Rim cleaning, model A, with dosing
pump
Loosens brake dust.
Warm water with special or increased de-
tergent addition.
Alkaline-based detergents only.
Distance of high pressure nozzle approx 30 cm.
Application before the car wash and only
on coated or painted wheels.
Rim cleaning, model B, with external
high pressure pump and mixing tank
Loosens brake dust.
Cold water with special high-dose deter-
gent addition while mixing in compressed
air.
Application before the car wash and only
on coated or painted wheels.
Intensive foam
Loosens persistent contamination.
Foam with special detergent addition.
Distance of foam nozzle approx 30 cm.
Under-chassis Wash
Removing coarse dirt from the underchas-
sis.
Washing cycle begins with a delay of ap-
prox. 10 seconds; drive the vehicle back-
wards and forwards over the under-chassis
wash.
1 Rest value display
2 Program selection switch
3 Throwing in the coin
1 Rest value display
2 Program selection switch
3 Throwing in the coin
Select the washing programme using
the programme selection switch.
Throw in the coin.
1 Washing brush
2 Locking lever
3 Hand spray gun
4 Lever for trigger gun
5 Safety lever
Press the locking lever for washing us-
ing high-pressure jet; pull the washing
brush towards the rear and lock it in.
To wash using the washing brush,
press the locking lever, push the wash-
ing brush forward and lock it in.
Unlock the trigger gun and pull the lever
of the gun.
The hand-spray gun and washing brush
are available as separate tools.
Hand spray gun:
Unlock the trigger gun and pull the lever
of the gun.
Washing brush:
Clean the washing brush with the hand
spray gun prior to use.
Set the washing programme "foam
wash" and clean the vehicle.
– Washing time starts after the coin is
thrown in.
– The remaining value display shows the
remaining washing credit in washing
units.
Note:
The washing time is running even if the pro-
gramme selector switch is in the "STOP"
position.
If more coins are thrown in during the wash-
ing time, the same are registered and add-
ed to the existing washing time.
Additional programmes (option)
Operations procedure
Single tool version
Double tool version (optional)
Washing time
5EN