Operating instructions
Table Of Contents
- Contents
- About this operating instructions manual
- Environmental protection
- Safety instructions
- Operation
- Open the system
- Settings
- Main switch
- Adjust compressor
- Setting dosing pumps
- Dry foam station
- Wheel cleaner/intensive foam (option)
- Micro emulsion (option)
- Blending device (option)
- Controls
- SB MB standard
- SB MB comfort
- Normal operation
- Open the menu "customer settings"
- Select the parameter you want to set
- Set the parameter with a variable
- Setting a parameter with several variables
- Exiting the menu
- Operating times
- Lighting time
- Fixed holidays
- Non-fixed holidays
- Date / Time
- Coin value
- Programme run times
- System settings
- Setting the dosing pumps
- System
- Hot blowers
- Washing station heater
- Frost protection with lost water
- Emergency frost protection
- External thermostat
- Filling in detergents
- Manual interventions
- Sales indicator
- Frost protection
- Shutting down
- Shutdown
- Function
- Flowchart system with wet foam
- Flowchart system with dry foam
- Attachment kit disconnection from mains (optional)
- Wheel cleaner/intensive foam (option)
- Micro emulsion (option)
- Frost protection 1-tool (option, SB- MB 2 pump Fp only)
- Frost protection 2-tool, wet foam (option, SB-MB 2 pump Fp only)
- 4. Type of water
- Internal frost protection (optional)
- External frost protection (optional)
- Washing place heating (option)
- Monitoring and safety devices
- Overflow valve of high-pressure pump
- Safety valve
- Thermostat mixing valve
- Flame monitoring
- Exhaust thermostat
- Temperature controller
- Temperature controller
- Flow monitor
- Water shortage safeguard
- Motor protection switch
- Hard water sensor
- Pressure switch for RO water shortage
- Level switch Buffer tank is full
- Level sensor pump RO on
- Level switch Buffer tank is empty
- Temperature limiter 4. type of water / warm (option)
- Technical specifications
- Maintenance and care
- Troubleshooting
- Who may remedy faults?
- Fault indication
- Faults shown in the display
- Acknowledge the faults
- Viewing the list of faults
- Viewing the event list
- Interruptions in warm water circulation
- Malfunctions of the washing station heater
- Burner malfunctions with oil-heated devices
- Burner malfunctions with gas-heated devices
- Malfunctions at coin mechanism
- Faults on high pressure pumps
- Disturbed detergent supply
- Malfunctions on the wheel cleaner/intensive foam
- Faults in the compressor
- Faults at the dry foam production (option)
- Interruptions in water preparation
- Faults on the frost protection units)
- Accessories
- Warranty
- Transport
- Storage
- Installing the unit (only for experts)
- Preparing the installation place
- Unpack the equipment
- Aligning the unit and installing it
- Assemble the installation parts
- Water connection
- Electrical connection
- Fuel pipe to the external fuel tank
- Connect the washing station heater and start it up
- Check oil level
- Filling in detergents
- Initial startup
- Turning the base exchanger on
- Start-up of the RO plant
- Check the pressure of rim cleaner (option)
- Check the function of the system
- Starting up the gas burner (option)
- Dimension drawing for CAB model
- Dimension drawing for SKID model
- Dimension drawing for SKID model with WSO upgrade kit
- EU Declaration of Conformity
- Log of high pressure testing
- 44
Order no. : 6.761-284.0
Order no. 6.768-004.0
for determining the fresh water hardness.
Order no. 6.768-003.0
For determining the residual hardness of
the softened water.
Order no. 6.548-066.0
to determinate the residual chlorine content
of the softened water and the fresh water.
Order no. : 6.287-016.0
Order no. : 6.288-016.0
Order no. : 6.288-055.0
Order no. : 6.288-028.0
Order no. : 6.288-116.0
Order no. : 6.290-911.0
Order no. : 6.228-001.0
Order no. : 6.295-515.0
Order no. : 6.295-517.0
Order no. : 6.295-519.0
Order no. : 6.295-521.0
Order no. : 6.295-523.0
Order no. : 6.295-553.0
Order no. : 6.295-428.0
Order no. : 6.295-838.0
Order no. : 6.295-419.0
Order no. : 6.907-200.0
Order no. : 6.394-374.0
6.394-255.0
Order no. : 6.999-023.0
6.999-080.0
6.999-046.0
Order no. : 6.999-017.0
RM 100 ASF
RM 101 ASF
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of your accessory within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication. In the event of a warran-
ty claim please contact your dealer or the
nearest authorized Customer Service cent-
er. Please submit the proof of purchase.
몇 CAUTION
Risk of personal injury or damage! Mind the
weight of the appliance during transport.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
몇 CAUTION
Risk of personal injury or damage! Consid-
er the weight of the appliance when storing
it.
Accessories
Attachment sets
Water filter G 1"
Test kits
Test set A
Test set B
Test set C
Fuel
Water softening salt in form of tabletts
Engine oil Hypoid SAE 90
Heavy duty grease
Silicon grease
Lock grease
Steel care product
Moisture protection spray
Detergent
Intensive dirt dissolver CP930 ASF, 20 l
HP wash CP 935 ASF, 20 l
Active foam CP 940 ASF, 20 l
Thermal wax CP 945 ASF, 20 l
Top care CP 950 ASF, 20 l
HP wash RM 806, 20 l
Hot wax RM 820 ASF, 20 l
Foam cleaner RM 838 ASF, 20 l
Appliance care
Wash hall and tile cleaner RM 841, 20 l
Squeegee
Spray bottle 1 l
RM Sprayer 5 l
Telescoping bar
Pad holder
White pads
Micro fibre cloth, blue
Lime solvent
Warranty
Transport
Storage
46 EN